Manual Felisatti AF125 (page 5 of 45) (English, German, French, Italian, Portuguese, Spanish)

502482

Zoom out

Zoom in

1/45

TECHNICAL DATA

Angle grinder AF115/900 AF125/900 AF125/1100VES

Input power W 850 850 1100

No-load speed /min 11000 11000 3000-10000

Max. disc diameter mm 115 125 125

Spindle thread ISO M14 M14 M14

Acoustic pressure dB(A) 95 94

Sound-power level dB(A) 108 105

Vibration acceleration m/s² 3,2 9,6

Approx. weight (without acces.) according

EPTAProcedure 01/2003

Kg. 2.1 2.1 2,2

The instructions contained in this manual must be strictly

followed, it should be carefully read and kept close at hand to

use when carrying out maintenance on the indicated parts.

If the machine is used carefully and normal maintenance is

carried out, it will work well for a long time.

The functions and use of the tool you have bought shall be

only those described in this manual. Any other use of the tool

is strictly forbidden.

ILLUSTRATIONS

DESCRIPTION (See gures)

A Start-up switch (Fig. 1)

B Auxiliary handle (Fig. 1)

C Disc guard (Fig. 2)

F Spindle (shaft) (Fig.6)

G Spindle blocking button (Fig. 1 and 6)

H Support plate (Fig. 6)

I Abrasive disc (Fig. 6)

J Clamping nut (Fig. 6)

K Pin spanner (Fig. 6)

EQUIPMENT

- Disc guard

- 1 auxiliary handle

- 1 pin spanner

- Disc clamping nuts

- Operating instructions

- Safety instructions

- Warranty

BRIEF DESCRIPTION

This angle grinder has been designed for cutting, deburring

and cutting metals and stone without the use of water.

BEFORE USING THIS TOOL

Before using the tool, make sure the mains voltage is correct:

it must be the same as that on the specication label.

Machines with 230V can also be connected to a 220-V mains

supply.

FITTING SAFETY DEVICES

WARNING! Always unplug the machine before carrying out

work on it.

1.1. Fitting the disc guard

Insert the guard ange D in the slot in the collar of the

machine plate and turn it to the desired working position.

If the guard does not t in the collar, loosen the bolt L.

The guard can be moved manually to the marked posi-tions.

To remove the guard, perform the same steps in reverse

order.

WARNING! The closed part of the disc guard should always

point towards the user.

1.2. Fitting the auxiliary handle

Use of the auxiliary handle is obligatory in order to ensure

greater control and safety when handling the tool.

The auxiliary handle B must be screwed on to the right or left

side, depending on the type of work to be carried out.

FITTING THE ACCESSORIES (DISCS AND WHEELS)

WARNING! For safety reasons, the machine should always

be unplugged from the mains before changing the disc

or wheel. Always work with the guard on and wear safety

goggles.

Use deburring and cutting discs with bre-reinforced

synthetic binders, for a max. peripheral speed of 80 m/s and

cup wheels with synthetic binder for 45 m/s.

Protect discs and wheels from knocks and blows.

WARNING! Never press the blocking button when the

machine is running. The shaft must have stopped com-

pletely before the blocking button is pressed.

To t the disc, proceed as follows (Fig. 6):

1. Block the spindle (shaft) F, by pressing the blocking

button G.

2. With the pin spanner K, remove the clamping nut J from

the spindle F.

3. Fit the abrasive disc on the support plate H.

4. Replace the clamping nut J, using the pin spanner K.

The position of the nut J will depend on the thickness of the

disc (see Fig. 4 and 5).

5. Once the disc is tted, check that the blocking button

has returned to its original position due to movement of the

incorporated spring.

STARTING THE TOOL

WARNING! Check that the mains voltage is the same as that

in the machine’s specications.

Plug the machine in with the switch off.

Start the machine by turning the switch to position 1 (“ON”).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Felisatti AF125 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Felisatti AF125 Manual

Product: