566022
10
Zoom out
Zoom in
Previous page
1/10
Next page
10
electrical shock or malfunction
- If the front cover of the plasma dust collector
is not properly installed, no electricity will
be connected
- Please make sure the plastic wrap for the
electrical discharge wire is located at its
proper position.
Cleaning and Replacing filters
-
The filter will collect large amount of the
dust , you may use a soft brush to clean it.
Please replace with new filters if using for
more than one year or the filter is heavily
polluted.
Replacing UV Lamp
-
Each 12 months, you may need to change
UV lamp.Turn off the unit, unplug the plug
from the socket and make sure the item is
off power.Gently take out the UV lamp form
the UV lamp holder.
- Put new UV lamp into the UV lamp holder
and make sure it is in its proper position.
Reinstating
-
After cleaning and drying every part, then
install the unit. Put every part back together
with the same steps but with opposite
sequence.
- There’s metal electrode at the bottom of
the plasma dust collect, please make sure
to install at its proper position. Otherwise,
the device cannot be energized.
- There’s safeguard protective switch
designed for this device, please make sure
to install front cover properly. Otherwise,
the device cannot be energized.
Problem Possible Cause Soulution
Why is it so hard for the filter to get rid of
dust and odor?
Why is it so difficult to collect dust and
eliminate odor?
Has any electrical discharge wire been
disconnected or broken?
Cannot turn on the unit Has the plug been loosened or
disconnected with the socked?
Has the unit been properly reassembled
after being cleaned?
The filter has been saturated with a
serious amount of dust.
Please replace with new filter.
The electrical discharge wires or the
plasma dust collector already gets too dirty.
Please clean and maintain this collector.
Please contact Authorized Fakir Service for
additional purchase.
Please check the plug.
The unit will not operate if the plasma dust collector
or the front cover is not properly installed.
Troubleshooting
NOTE: The unit will not operate if the plasma dust collector or the front cover
is not properly installed.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fakir VITA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fakir VITA in the language / languages: English, Turkish as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info