566108

Fakir SENIOR Manual

10
Zoom out
Zoom in
Previous page
1/12
Next page
Using the hair clipper:
For hair clipper, push the On/Off switch
upwards to the “On” position. It is
recommended that the hair is initially not
trimmed too short.
Choose the transparent cutting length
attachment with lengths between 4, 8, 12,
16 or 20 mm.
Plug the comb attachment onto the side
rails of the housing. An oval retention plate
is located on the underside of the
attachment. Press it with the thumb against
the appliance and at the same time push
the comb attachment into the desired
position. Make sure that the attachment is
always firmly locked in before you start
trimming hair.
If you would like to further shorten the hair,
you can push the comb attachment
downward into another position to repeat
the cutting process.
Thinning function:
Choose the desired comb attachment
length and set the thin-out function with
the top slide (1….0). With this function you
can reduce the volume of hair without
changing the hair length.
Cutting contours and shaving the nape
of the neck:
Remove the cutting length comb from the
appliance. The ceramic and titanium cutter
set permits exact following of the contours
even at points of difficult access and also
clean shaving of the hairline on the nape
of the neck.
After use, switch the hair clipper off by
moving the On/Off switch downwards into
the “Off” position.
Cleaning and Care:
• Unplug the appliance from the mains before
you clean the appliance.
• Never hold the mains adapter unit with wet
hands when plugging it in or unplugging it
from the socket.
• Always keep the mains adapter and
connecting lead dry.
Cleaning with water:
The cutting unit can be easily cleaned under
a running water. Water temperature should
not be more than 70°C.
• Switch the appliance off and pull out the
mains plug from the socket.
• Remove the adjustable cutting length from
the appliance.
• Press the cutters set with the thumb
towards the back, remove it from the holder
and take it off.
• Ensure that the cutting unit does not fall
down.
• Remove remaining hair residue from the
shear head with the enclosed cleaning
brush. The cutter set can also be washed
under flowing water. The ceramic and
titanium blades are stainless steel that can
be washed under the water.
• The appliance can be wiped down but it
must not be immersed in water or any other
liquid as it contains live parts (rechargeable
batteries).
• Once the cutter set is completely dry, insert
it again by guiding the bottom projection of
the cutter set into the housing opening and
firmly pressing the trimmer head until it
audibly latches.
Oiling the trimmer head:
• Ensure that your appliance is switched off
before oiling it.
• Remove the cutting length comb and the
cutter set from the appliance.
• Before oiling, remove any accumulated hair
between the blades using a small brush
and oil the blades with the oil supplied in
accessories.
• Wipe off the excessive oil with a cloth.
• For oiling the trimmer head only use acid
free oil.
10
… 10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fakir SENIOR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fakir SENIOR in the language / languages: English, Turkish as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info