Manual Faber Arkea (page 3 of 140) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian)

753235

Zoom out

Zoom in

1/140

Recommendations

and suggestions

• The Instructions for Use apply

to several versions of this appli-

ance. Accordingly, you may nd

descriptions of individual features

thatdonotapplytoyourspecic

appliance.

• The manufacturer will not be held

liable for any damages resulting

from incorrect or improper instal-

lation.

• The minimum safety distance

between the cooker top and the

extractor hood is 650 mm (some

models can be installed at a

lower height, please refer to the

paragraphs on working dimensions

and installation).

• Check that the mains voltage

corresponds to that indicated on

theratingplatexedtotheinside

of the hood.

• For Class I appliances, check that

the domestic power supply guaran-

tees adequate earthing. Connect

the extractor to the exhaust ue

through a pipe of minimum diam-

eter 120 mm. The route of the

uemustbeasshortaspossible.

• Do not connect the extractor hood

to exhaust ducts carrying combus-

tionfumes(boilers,replaces,etc.).

• If the extractor is used in conjunc-

tion with non-electrical appliances

(e.g. gas burning appliances),

a sufcient degree of aeration

must be guaranteed in the room

in order to prevent the backow

of exhaust gas. The kitchen must

have an opening communicating

directly with the open air in order

to guarantee the entry of clean air.

When the cooker hood is used

in conjunction with appliances

supplied with energy other than

electric, the negative pressure in

the room must not exceed 0,04

mbar to prevent fumes being

drawn back into the room by the

cooker hood.

• In the event of damage to the

power cable, it must be replaced

by the manufacturer or by the

technical service department, in

order to prevent any risks.

• If the instructions for installation

for the gas hob specify a greater

distancespeciedabove,thishas

to be taken into account. Regula-

tions concerning the discharge of

air have to be fullled.

• Use only screws and small parts

in support of the hood.

Warning: Failure to install the

screwsorxingdeviceinaccord-

ance with these instructions may

result in electrical hazards.

• Connect the hood to the mains

through a two-pole switch having

a contact gap of at least 3 mm.

Use

• The extractor hood has been

designed exclusively for domestic

use to eliminate kitchen smells.

• Never use the hood for purposes

other than for which it has been

designed.

• Never leave high naked ames

under the hood when it is in op-

eration.

• Adjusttheameintensitytodirect

it onto the bottom of the pan only,

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Faber Arkea in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 6,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Faber Arkea Manual

Product: