560724
5
Zoom out
Zoom in
Previous page
1/6
Next page
Technologie : hyperfréquence
Fréquence émise : 24,125 GHz
Densité de puissance
émise : << 5 mW/cm
2
Distance de détection : 10 à 50 cm (réglable)
Mode de détection : mouvement
Tension d’alimentation : 12 à 24 V AC ±10%
12 à 24 V DC +30% / –10%
Fréquence secteur : 50 à 60 Hz
Consommation :< 2 W
Sortie : relais inverseur
(contacts libres de potentiel)
•Tension max. aux contacts : 60 V DC / 125 V AC
•Courant max. aux contacts : 1 A (résistif)
•Pouvoir de coupure max. : 30 W (DC) / 60 VA (AC)
Temps de maintien
de la sortie : 0,5 s à 10 s (réglable)
Réglages : sensibilité, temps de maintien
(par potentiomètre)
Gamme de température
: –20°C à +55°C
SPÉCIFICATIONS
TECHNIQUES
DESCRIPTION
DU
DÉTECTEUR
DÉMONTAGE
INTERRUPTEUR HYPERFREQUENCE SANS CONTACT
We open up New Horizons
Immunité : compatibilité électromagnétique
(CEM) selon 89/336/CEE
Dimensions
Encastrement en : diamètre : 65 mm min.
boîtier circulaire profondeur : 41 mm min.
face-avant : carré de 81 mm de côté
Boîtier carré : côté : 81 mm
profondeur : 41 mm
face-avant : carré de 81 mm de côté
Encastrement : derrière une paroi non métallique
personnalisé (carrelage, bois, plâtre, plastique, verre)
épaisseur : 2 cm max.
(dépendant du matériau)
Masse : 0,155 kg
Matière : ABS
Couleur de la
face avant : blanc (autres coloris en option)
GUIDE DE L’UTILISATEUR MAGIC SWITCH
41.9080 / V1 • DESIGN VANGE 32. 4. 252 94 27
FONCTIONNEMENTS
INCORRECTS
SYMPTÔMES ACTIONS CORRECTRICES
La porte ne s’ouvre pas 1. Vérifier le raccordement du détecteur
2. Vérifier le réglage de la portée
La porte reste ouverte 1. Vérifier le raccordement du détecteur
en permanence
2. Vérifier le réglage du potentiomètre de temps de maintien
3. Vérifier la fixation du détecteur et la présence de perturbations
éventuelles
Boîtier
d’encastrement
normalisé
Boîtier d’encastrement normalisé
Réglage
du lobe
de détection
Bornier
Potentiomètre
de temps
de maintien
du relais
Ø 65mm min.
Face
avant
Autocollant
Parc Scientifique du Sart Tilman - Allée des Noisetiers, 5 B-4031 Angleur - Belgique - tél. +32 4 361 65 65 - fax. +32 4 361 28 58 - e-mail. sales@bea.be - http://www.beasensors.com
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for FAAC MAGIC SWITCH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of FAAC MAGIC SWITCH in the language / languages: English, French as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info