Operating modes
Page | 35
Setting options:
- - 30% to 80% air humidity
(in five-per cent
increments)
- CO (desired air humidity of
under 30% during
continuous air
dehumidification)
- - low exhaust stage
- + high exhaust stage
Proceed as follows when setting
the normal operating mode:
1. Press button 22, until the
control light above button 22
blinks for normal operation.
2. The control light blinks for a
few seconds. As soon as the
control light is constantly on,
the dehumidifier works in the
normal operating mode.
3. Press the + button in order to
increase the desired air
humidity or press the - button
in order to reduce the desired
air humidity.
4. The selected air humidity
blinks for a few seconds.
5. Subsequently, the display on
the screen changes to the
current air humidity.
6. Press button 20 in order to
select the desired exhaust
stage.
7. Control light 10 or 22 will
indicate which exhaust stage
you have set.
8. Press button 23 in order to
select another operating mode
and to terminate the normal
operating mode.
16.2 Drying laundry
In the laundry drying operating
mode the degree of air humidity
(CO) and the high exhaust stage
are pre-set and cannot be
changed. You can select this
operating mode for example to
guide the air flow with
dehumidified air via the
exhaust flap (1) to laundry which
is to be dried.
1. Press button 23, until the
control light (13) for drying
laundry blinks (see fig. C).
The control light will blink for
a few seconds.
2. As soon as the control light is
constantly on, the
dehumidifier works in the
laundry drying mode.
3. Control light 10 indicates that
the high exhaust stage is set.
4. The current air humidity is
indicated in the display.
5. Press button 23 in order to
select another operating mode
and to terminate the laundry
drying operating mode.
16.3 Air circulation
In the air circulation operating
mode only the selected exhaust
stage is active whereas the
dehumidifying function is de-
activated. For example, you can
select this operating mode
in order to let the room air
circulate, without dehumidifying
it.
1. Press button 19 until the
control light above button 19
blinks for air circulation (see
fig. C). The control light will
blink for a few seconds.
