1.Your oven is adjusted in compliance with 230 Volt 16 Ampere electric supplies. (For 3 phase 230V/400V 32 Ampere) If the mains is different from
these values, contact your authorized service.
2.Electrical connection of the oven should only be made by the sockets with earth system installed in compliance with the regulations. If there is no
proper socket with earth system in the place where the oven will be placed, immediately contact a qualified electrician. Manufacturer shall never be
responsible from the damages that will arise because of the sockets connected to the appliance with no earth system.
3.Electrical cable should not touch the hot parts of the appliance.
4.Some models are supplied without a plug-an-lead set. In this case please use a flexible cable to suitable for connection to mono phase: H05 VV-F 3
G 4 mm2 or for 3 phase: H05 VV-F 5 G 1.5 mm2
Gas Connection and Security
1.Before your appliance is connected to the gas supply, ensure that the gas category and pressure specifications shown in the data plate corresponds
with your gas supply. If necessary call authorized service for adjusting to gas category.
2.This appliance shall be installed in accordance with the regulations in force and only used in a well ventilated space. Read the instructions before
installing or using this appliance. In the interest of safety this appliances must be installed and / or serviced by a competent person as stated in the
gas safety regulations current editions.
3.The appliance must not be installed in a room without a window or other controllable opening. If is installed in a room without a door which opens
directly to the outside, a permanent opening is required. The air circulation should be 2 m3/h per kW of burners.
4.The gas connection should be performed from the right or left. For this reason, change the hose nozzle, plug and the seals.
5.If you make a connection with a flexible metal hose, locate a seal between the main gas pipes.
6.The inner diameter of the flexible hose, which the butane hose nozzle is connected, should be 6mm for the house-type gas tubes. The inner
diameter of the flexible hose, which the natural hose nozzle is connected, should be 15mm.The hose should tightly be fitted to the hose nozzle by
squeezing with a clamp.
7.The hose should be replaced before its last expiry date.
8.Caution! Make the oven connection to the gas inlet valve, the hose length must be short and be sure that there is no leakage. The hose used should
not be longer than 125 cm for safety.
9.RE-INSPECT THE GAS CONNECTION.
10.When placing your oven to its location, ensure that it is at the counter level. Bring it to the counter level by adjusting the feet if necessary.
DO NOT MAKE GAS HOSE and ELECTRICAL CABLE OF YOUR OVEN GO THROUGH THE HEATED AREAS, ESPECIALLY THROUGH THE REAR SIDE OF
THE OVEN. DO NOT MOVE GAS CONNECTED OVEN. SINCE THE FORCING SHALL LOOSEN THE HOSE, GAS LEAKAGE MAY OCCUR.
3
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Exquisit GE 9409.1 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Exquisit GE 9409.1 in the language / languages: English, French as an attachment in your email.
The manual is 1,53 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
