565033
2
Zoom out
Zoom in
Previous page
1/2
Next page
Additional setting possibilities
Freeze protection function
Window function
Adapter table
Heimeier
Junkers
Landys+Gyr
MNG
Honeywell Braukmann
Danfoss RAV
Additional adapter types are listed on the Internet
at www.eurotronic.org under Downloads.
No adapter
required
Help
Danfoss RA
Danfoss RAVL
Child lock
In the time program you can set 2 heating times
and 2 economy times for each weekday. In the time
program the week days are numbered from 1-7
(1=Monday to 7=Sunday).
Setting your own time program:
Press the button
Use the thumb wheel to select the day/block of days
Confirm with the button
Use the thumb wheel to set the beginning of the
1st heat time
Confirm with the button
Use the thumb wheel to set the beginning of the
1st economy time
Confirm with the button
Use the thumb wheel to set the beginning of the
2nd heating time1
Confirm with the button
Use the thumb wheel to set the beginning of the
2nd economy time1
Confirm with the button
Conclude the process with the button.
Or select the next week day or block of days.
Non-programmed days = factory setting is active
1 Do you want to program these days, if so confirm with "-- --".
PROG
AUTO
MANU
PROG
PROG
PROG
PROG
PROG
Press the button
Set the comfort temperature with the thumb wheel
Press the button
Set the economy temperature with the thumb wheel
Confirm with the button
Area OFF: 8° C, freeze-protection is active
Area ON: Valve is completely open
Changing date and time
SPARmatic
saving time to standard time. Nevertheless if you
want to correct time and date in running operation:
automatically switches from daylight
Press the button for 2 seconds.
Then adjust as described above.
Changing comfort and economy
temperature
PROG
Are you lost in the program?
Press the button will then
discard the last entry and will return
to AUTO mode
SPARmatic
AUTO
MANU
Tip: You obtain maximum energy efficiency with
an economy temperature that is approximately 5°C
below the comfort temperature.
Problem Cause Solution
Batt
Batteries do not have
enough power
Replace batteries
Heating element
does not cool
down
Valve does not close
completely.
It may be that the
closing point of your
valve seat has shifted.
Adapt again, see
"Adapt"
E1
No adaptation possible
Is the installation OK?
E2
Valve stroke is too short
Open and close the
valve several times
manually
E3
Motor movement is not
possible
Does the valve stem
move freely??
Move the valve stem
several times by hand,
it may be that
adaptation is impossible
because your valve is
calcified or the seat no
longer performs its
function.
Heating element
does not warm up
Is the boiler water temperature OK??
Valve does not open,
is it calcified after the
summer pause/heating
pause?
Remove the
matic, move the valve
stem back and forth per
hand or with a tool
SPAR-
For example, to set all days the same: Select 1-7 (Mon-Sun
same program)
With accompanying pin
Konformitätserklärung
Declaration of Confirmity
Wir EUROtronic GmbH
We Südweg 1
36396 Steinau
erklären, daß das Produkt
declare that the producte
elektronisches Heizkörperthermostat SPARmatic
electronic radiatorcontroller SPARmatic
auf das sich diese Erklärung bezieht, mit
folgenden Normen übereinstimmt
To which this declaration relates is in confirmity
with the following standard
International
SPARmatic
requirements of the 73/23 EEC Low-Voltage
Directive, as well as the
EMC law 10 / 11 / 1992
They bear the CE mark
Steinau, 20.01.05
satisfies the binding
EN 55022
EN 55014
EN 61000
This declaration certifies agreement with the directives cited, however
it does not contain any assurance of characteristics.
Guarantee
The guarantee period is 24 months and it starts on the date on which the product was purchased by the end user. Please keep
the purchase receipt for the duration of the guarantee period; it must be submitted for a guarantee claim. This product has
been manufactured using state-of-the-art production processes and in addition it has been subjected to rigorous quality
controls. Nevertheless if defects should occur during the guarantee period, please contact us at the address listed below:
EUROtronic Technology GmbH, Südweg 1, D 36396 Steinau/Germany
Please note that shipments of goods, return shipments, and other shipments can only be accepted if postage/shipping charges are prepaid in full.
AUTO
MANU
PROG
PROG
The valve is now closed and will work without
a time program.
If you open a window and consequently the temp-
erature drops significantly, SPARmatic will
automatically close the heating valve in order to save
energy. In this case the display will show .
After 10 minutes SPARmatic will resume normal
operation. You can also open the valve before the
10 minutes have elapsed by pressing the
button.
PROG
If the temperature drops below 6°C, then SPARmatic
will open the valve until the temperature again rises
above 8°C. This prevents the radiators from freezing.
Calcification-protection functio
To prevent radiator valves from calcifying,
SPARmatic executes a calcification protection
movement once a week on Friday mornings. Another
adaptation is executed in this process to adjust to
any changes that may have occurred to the valve seat.
PROG
+
You can lock SPARmatic to protect the device from
unauthorized activation. To do this press the buttons
at the same time for more than
2 seconds until BLOC appears in the display; use
this button combination to release the block.
Heating pause/summer pause -Closing the
SPARmatic
Use the button to switch to MANU mode
Resetting SPARmatic / all reset
Often the perceived temperature significantly
deviates from the set thermostat temperature,
for example due to spatial distance to the
radiator. For this reason you should execute a
temperature set up that is specifically adapted to
your room situation. To do this press the button
for 5 seconds. The degree setting will flash in the
display. Now set the desired temperature increase
on the SPARmatic unit. Confirm your entry with the
button. The temperature shown in the
LCD display does not change!
Vacation function
PROG
PROG
Additional setting possibilities
AUTO
PROG
PROG
PROG
PROG
Activate the vacation function by pressing the
+ buttons at the same time. The
suitcase icon will be shown in the display.
Use the thumb wheel to select the end of your vacation
function (= date for resumption of regular heating
times.) Confirm the entry with the button.
Now enter the time (=resumption of regular heating
times) and again confirm with the button.
Now enter the vacation temperature and confirm
your entry with the button.
After pressing the key again the vacation
function is activated. The suitcase icon is shown in
the display. Press the button again to
deactivate the vacation function.
Pkg. art no.: 900 000 040, version: 11 / 2007
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurotronic Sparmatic Basic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurotronic Sparmatic Basic in the language / languages: English as an attachment in your email.

The manual is 0,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eurotronic Sparmatic Basic

Eurotronic Sparmatic Basic User Manual - German - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info