Manual Eurom Force 1400 (page 17 of 28) (English, German, Dutch, French)

509992

Zoom out

Zoom in

1/28

The safety regulations specified elsewhere in this booklet must be taken into account at all times in order

to prevent damage to the machine and the surface to be cleaned and personal injury.

ASSEMBLY

 Place the cleaner as close as possible to the water supply.

 The cleaner must be placed upright on a robust, flat and

horizontal surface (handle on top).

 Insert the end of the lance extension completely into the handle

(A) and secure it with a quarter turn (B). Then fasten the

connection by tightening the coupling nut. See diagram 1.

 Fasten the jet lance to the lance extension by inserting the end

of the jet lance completely into the lance extension and

securing it with a quarter turn.

 The Force 1400 also has a turbo-lance as standard, which can

be used instead of the normal jet lance if desired.

 Connect the handle to the high-pressure hose. See diagram2.

 Connect the high-pressure hose to the water inlet of the

machine.

 Fasten the female quick-lock to the water supply hose and then

connect them to the water inlet of the machine. The (not

supplied) water supply hose must have a minimum diameter of

13 mm (1/2”) and be reinforced.

Attention!

 The water supply must supply at least the water consumption of the machine (330 l/h)! The pump

must always be supplied with sufficient water. ’Dry operation’ causes damage.

 The water temperature may not exceed 40°C. The pressure of the water supplied may not exceed

0.7 MPA (7 bar).

 Only use clean water with this machine. Impurities or aggressive chemicals damage the machine!

OPERATION

 Turn the On/Off switch to the OFF/O (Off) position.

 Check that the specifications of the socket that you wish to use correspond with those on the type

plate of the machine. If this is the case, insert the plug into the socket.

 Open the water supply completely.

 Unlock the safety lock under the handle.

 Now squeeze the trigger for several seconds in order to de-aerate the hose.

 Switch the machine on by switching the On/Off button to I/ON. The motor will start briefly, but will

stop again as long as the trigger is not squeezed.

 Now squeeze the trigger – the machine will start.

 The automatic start/stop system means that the motor only works when the trigger is

squeezed.

 The jet produced by the jet lance can be adjusted from narrow to wide by turning the head of the

lance. Never do this while spraying!

 The turbo-lance (Force1400) creates a narrow rotating jet.

TIPS FOR USE

 When the water jet leaves the nozzle it causes the handle to recoil. You must therefore ensure that

you are standing in a stable position and have a firm grip. Also ensure that the high pressure of the

water jet does not cause objects to move out of place or fall or fly around and cause damage. Also

select a safe location for yourself!

 Keep your work environment clean and tidy.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eurom Force 1400 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eurom Force 1400 Manual

Product: