500320
3
Zoom out
Zoom in
Previous page
1/4
Next page
3
CAUTION: Read the instructions for “Filling the Water Tank” before opening the Safety Cap.
Always vent the boiler until all pressure/steam has been removed before opening the safety cap. Venting
the boiler is done by sliding the red switch on the steam gun into the on position.
IMPORTANT: Do NOT add cleaning solutions, scented perfumes, oils or any other chemicals to the water
used in this appliance. Use tap water or distilled/puried water if the tap water in your area is very hard.
Flush out the boiler after 10-15 rells by adding warm water to the boiler, shake vigorously and empty
the boiler to remove calcium deposits.
IMPORTANT:
Always ensure that the unit is “UNPLUGGED” from the wall outlet prior to initial lling or re-lling the
water tank.
INSTRUCTION FOR USE
- Place Water Filling Funnel in tank and add 0,8 Lt of water Do not overll. Replace Safety/Filler Cap
by turning clockwise. Time for heating up with cold water may vary from 2 to 6 minutes based on the
quantity of water in the tank.
- Plug the unit into a standard electrical outlet. The power light will illuminate
- Let steam reach the best temperature and pressure by waiting5-7 minutes.
NOTE: IF NO STEAM IS RELEASED, ALLOW MORE TIME TO HEAT UP.
- Connect desired attachments onto the Flexible Steam Hose.
- Upon initial use, some water will come out from the nozzle of the attachment. This is unheated water
in the hose and is normal.
IMPORTANT: When the SC 50 has run out of water, steam output will cease.
CAUTION: Before relling let the boiler cool down. When relling the machine while it is still hot, the rst
drops of water might bubble up. Use caution when opening the Safety/Filler Cap as cap may become
hot during use and escaping steam can cause scalding.
FILLING THE STEAM CLEANER WITH WATER
To attach the accessories onto the steam gun, press the security
button ensuring that the accessory ts into the hole.
To disconnect, repeat the operation by pressing the security
button and pulling the accessory out.
CONNECTING THE ACCESSORIES TO THE STEAM GUN
Accessory
Security button
Security button
Handle
TO RELEASE THE STEAM
To release the steam from the steam gun, slide the red trigger switch forward.
The steam will continue to ow while the trigger switch is in this position.
TO TURN OFF THE STEAM
To turn off the steam, slide the red trigger switch back to the off position
NOTE:
If during operation the steam cleaner is left idle for more than 3 minutes, any steam left in the exible
hose will cool down and re-condense back into water causing water to be discharged from the e-
xible hose.
To remove any water condensation from the exible hose, drain the hose in a sink by sliding the red
trigger switch forward. The dry steam will ow after the water has been drained from the hose. Use the
steam cleaner as normal.
PRODUCT DESCRIPTION
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Euroflex MONSTER SC50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Euroflex MONSTER SC50 in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info