500321

Euroflex Monster SC35 PLUS Manual

6
Zoom out
Zoom in
Previous page
1/8
Next page
6
USING THE FLOOR BRUSH WITH THE CLOTH
Use a cotton cloth on the oor brush to absorb dirt and protect delicate surfaces. It can
also be used on vertical washable surfaces following the same procedure as the oor.
Put the cotton cloth under the oor brush and put the edges of the cloth under the
clamps. Once the cloth is too wet or too dirty, a clean cloth should replace the dirty
cloth. Old terry-cloth towels can be used or additional cloths can be purchased from
the retailer. If the oor surface is rough or textured, then use the bristles underneath
the oor brush to scrub the rough or textured oor. Then replace the cotton cloth to
absorb the loosened dirt.
CAUTION: The cloth will heat up. Take care when removing the cloth or replacing it
with a clean cloth.
IMPORTANT: When cleaning timber oors, parquetry, painted walls and ceilings and
other delicate surfaces make sure that the cotton cloth is securely attached to the
bottom of the oor brush and that none of the bristles break through. Please note
that bristles may break through thin cloths. If you don’t have a thick enough cloth,
please use 2 cloths.
ACCESSORIES
WINDOW CLEANER: This attachment is very useful for cleaning windows
and glass surfaces. Connect the window cleaner to the steam gun. Apply
steam abundantly, rub with the soft spongy edge then remove excess
water and dirt with the glass wiping edge (squeegee).
Wipe the squeegee with a cloth after every stroke.
CAUTION:
When cleaning windows, always avoid any sudden changes in temperature to
prevent glass breaking or cracking. Do not use on thin panes of glass or glass with
a thin wire mesh embedded in the glass.
DETAIL NOZZLE: This attachment is very useful for cleaning surfaces that
are difcult to reach. It is ideal for door and window tracks, shower door
tracks, wall grout in showers etc. The detail nozzle will t directly onto
the steam gun or it may be used with extension tubes.
DETAIL NYLON BRUSH: This brush is best used for cleaning grout found
in-between tiles or for any other surface that requires a bristle to do
light scrubbing. Push the detail brush onto the end of the detail nozzle.
PALETTE KNIFE: This attachement is best for removing small amounts of
wallpaper and for removing anything that can be scraped from a at
surface e.g. grease deposits in an oven. It is also useful when defrosting
freezers by scrapping away softened ice.
To use: Push the palette knife onto the end of the detail nozzle.
DETAIL BRASS BRUSH: This brush is best used for cleaning grease on oven
racks or grills and inside the enamel interior of ovens. To increase the
surface area of the brass brush, attach a small stainless steel scourer on
the brass brush to assist with removing baked on grease. Push the brass
brush onto the end of the detail nozzle.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Euroflex Monster SC35 PLUS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Euroflex Monster SC35 PLUS in the language / languages: English as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info