307996
68
Zoom out
Zoom in
Previous page
1/72
Next page
68
Problem check list
Faults possible causes Solving the problem
drum stationary
no spin
machine moves, does not stand
properly
little or no detergent enters the machine
conditioner in the machine at
programme start
conditioner compartment ooded
traces of water on oor
washing not cleaned
washing is damaged
powder residues in washing
The water is not pumped off
• no electricity supply
• no programme selected
• loading door open
• no spin selected “
• the washing is unevenly distributed
• does not stand correct on the oor
• detergent drawer blocked
• incorrect programme selection
• to much conditioner in compartment III
• intake valve blocked
• excess lather dripping from machine
• detergent drawer open
• inlet hose leaking
• drain trap tted incorrectly
• to much or to little detergent
• incorrect programme selection
• incorrect temperature selection
• certain staines remain
• sharp object in drum
• sharp object in clothing
• faulty fabrics
• interruppted water supply
• detergent in conditioning drawer
• water is to soft
the run off system is blocked or the hose
has a kink
the lye pump is clogged
• plug in another socket check fuse
• select programm (see P. 54 - 55)
• close loading door
• select spin from 500 - 1100 rpm
• if the laundry is unevenly distributed,
the machine will automatically return to
the wash cycle for a short period, until
the spin cycle can commence. If this
is not possible the programme will end
without spinning.
--> loosen the washing by hand, and
select spin programme P7 once more.
• adjust machine properly - see
instruction page 52 - 53
• clean drawer (see P. 65)
• see programme selection (P. 54 - 55)
ll to max. - line only
• clean detergent drawer and valve
(see P. 65)
• correct detergent dosage
• close drawer
• check connection of inlet hose on
machine and cold ll tap.
• see P. 66
• correct detergent dosage (see P. 63)
• see P. 54 - 55
• see P. 54 - 55
• see P. 69
• check inside drum
• check pockets
• claim from fabric manufacturer
• check water supply
• clean detergent drawer (see P. 65)
• add extra rinse cycles or raise water
level during rinse cycles (P. 60 - 62)
• check hose and runoff
• clean lye pump (see page 63)
If your washing machine fails to operate correctly after having carried out the procedures listed above, please
contact your customer service.
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eumenia babynova 1150 rapid at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eumenia babynova 1150 rapid in the language / languages: English, German, French as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info