755669
4
Zoom out
Zoom in
Previous page
1/14
Next page
04 EN EN 05
Charge the Camera
1. Connect one end of the micro USB cable to the baby camera, and the other end to the power
adapter (5V 1A).
2. Plug the power adapter into a power outlet.
5V/1A
The new baby monitor and camera will set up automatically. You are all set to use the products
after the monitor and camera are fully charged.
ADDING A NEW BABY CAMERA TO THE
BABY MONITOR
The baby camera and baby monitor are paired and ready to use right out of the box. Refer to the
following steps when adding extra baby cameras or after resetting a baby camera.
1. Enter menu settings, go to Camera -> Add Camera, then follow the onscreen
instructions to start the pairing.
Add Camera
Delete Camera
Cycle Cameras
Camera Settings
60 Secs
Scanning for new camera
Push the button on the
camera to pair.
1Secs
4
23o
c
06 12 AM
:
2. Press and hold the pairing button on the rear of the camera for 1 second until a notication
prompt is heard.
3. Check the rmware version of the monitor (see image below) to make sure your baby monitor
and camera are running the same, latest rmware version.
Language
Anti-Screen Flicker
Default Settings
Temperature Unit
Sleep Mode
Connect with Us
Night Vision Mode
Time Set
4
06 12 AM
:
Monitor: v x.x.x
Camera: v x.x.x
SN: T8300E0A18370E72
https://www.eufylife.com
United States +1 (800) 988 7973
United Kingdom +44 (0) 1604 936 200
Germany +49 (0) 69 9579 7960
Japan +81 03 4455 7823
support@eufylife.com
To check whether it is the latest version:
1 Visit the website below: https://www.eufylife.com/support/5505/spaceview-baby-monitor
2 If the rmware version is lower than the version shown online (highlighted in green), click the
firmware version to download. The downloaded file includes firmware for both T8300 and
T8321 models, make sure you use the T8321 rmware.
3 Follow the steps in the eufy Security Software Upgrade Guide” video or Firmware
Upgrade Manual to complete rmware upgrade.
Note: The eufy Security Spaceview baby camera can be added to the monitor. Before adding
the camera, make sure SpaceView baby camera is running the same, latest version
with the monitor’s.
Chrome OS is not supported for rmware upgrade.
Before you upgrade rmware, use the provided micro USB cable (1m) to connect the
device needed to your computer.
USING THE BABY MONITOR
When 2 or more cameras are added to the monitor, you can manually switch among cameras by
pressing the monitor’s OK button. Once the camera switch is completed, the icon of the selected
camera will appear on the corner of the baby monitor.
You can also select the Cycle Camera” option. The screen cycles through the list of connected
baby cameras according to the preset intervals.
Note: The monitor will emit a loud noise if placed too close to the camera. This is normal and is
resolved once the camera is moved away from the monitor.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eufy Video Baby Monitor 720P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eufy Video Baby Monitor 720P in the language / languages: English as an attachment in your email.

The manual is 2,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info