651169
6
Zoom out
Zoom in
Previous page
1/48
Next page
6 - Epic 442 Assembly and User Manual
4930659-02
Unpacking and inspection
Your new tanning bed arrives completely
assembled. The reason for this is to assure
everything has been tested at the factory. Be-
fore performing any work, inspect the unit
carefully and identify any issues that may
have happened during shipping. Notify the
transportation company immediately to re-
port any shipping damage.
Record the serial number of the unit in the
area provided at the back of this manual.
This information will be required whenever
you call customer service.
Pre-installation Planning
The following instructions outline a com-
plete disassembly and reassembly. Prepare
an area for disassembly to place items prior
to installation in the nal space.
No hardware has been provided as the hard-
ware needed will be removed during the
disassembly process. Be sure to keep track
of all hardware removed.
Electrical Requirements
You are responsible for preparing the facility
for your tanning bed. Please have an electri-
cian present at the time your tanning bed is
installed. That way the installation crew can
fully verify all functions before they leave.
This unit runs on 220VAC service and must
be hardwired directly to a junction box on a
dedicated circuit. A professional electrician
is recommended for electrical installation.
This unit requires a minimum 30A cir-
cuit breaker on a 3-phase line (3 wire plus
ground). Alternatively, it requires a minimum
40A circuit breaker on a single phase line (2
wire plus ground). See page 32.
Proper assembly of your sunbed
requires 3-4 people. Plan to have
some helpers assist you.
CAUTION
DO NOT lift the unit using the plastic
endcaps. They are not designed to
hold the weight of the unit and may
break, causing damage to the unit and
possible injury.
CAUTION
Air from the room is used to cool the
sunbed. Maximum ambient room tem-
perature should be 80°F. Place your
sunbed no closer than 6” from any
wall. Make sure nothing obstructs the
airow into or out of the fan openings.
A poorly ventilated room may cause
the unit to become hot and cause dis-
comfort to the user.
CAUTION
Voltage must be between 215-245 AC
(loaded) or may require a buck-boost-
er for proper operation. Excessively
high voltage could cause damage and
void the warranty.
CAUTION
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ETS Tan Epic 442 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ETS Tan Epic 442 in the language / languages: English as an attachment in your email.

The manual is 3,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info