336796
48
Zoom out
Zoom in
Previous page
1/50
Next page
Ventilation
The electronics in the appliance require cooling.
The ventilation openings are located on the
underside of the appliance. It must be possible for
cool air to be drawn in through these openings.
The appliance is fitted with outlet openings at the
front and bottom. The kitchen unit will require a
few modifications to allow optimum cooling of the
hob.
Above drawer or fixed panel
Saw out the ventilation openings
(min. 100 cm
2
). Ventilation is via plinth and rear of
cupboard.
Do not allow the ventilation openings
on the underside of the appliance to be
blocked by a drawer.
Where there is a drawer, a gap of at least
560 x 3 mm should be made at the front.
The distance between drawer A and the hob
should be a minimum of 10 mm.
No extra modifications for ventilation need be
made where there is a fixed panel.
Ventilationprotection
The electronics in the appliance require cooling.
The cool air is sucked from behind the cupboard
and blown out at the front and at the bottom in the
front of the appliance. The hob can only operate if
there is sufficient circulation of fresh air.
The appliance will switch off after a short
time if there is not enough circulation.
150
A
min.
560 x 3 mm
min.
10 mm
Building in
Cut opening in worktop
Saw the opening in the worktop. This should be done very accurately (see table). Also saw out any
partitions that may be present. The distance from the saw line to the rear wall and/or side wall is
indicated in the table.
Building-in dimensions
Table:
Space to be left free around the appliance:
Type of hob A361KZT
Appliance width x depth
600 x 510 mm
Installation height from top of worktop
52 mm
Cut out dimensions width x depth
560 x 490 mm
Distance from saw line to rear wall
50 mm minimum
Distance from appliance to side wall
40 mm minimum
94
95
INSTALLATION
INSTALLATION
min.50
490
560
600
voorzijde
52
510
min. 600 mm
min. 650 mm
min. 450 mm
min. 40 mm
cooker hood
cabinet
side wall
hob
min. 40 mm
front
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna a 361 k at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna a 361 k in the language / languages: Dutch as an attachment in your email.

The manual is 3,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info