668762
7
Zoom out
Zoom in
Previous page
1/8
Next page
7
ASSEMBLY AND OPERATING INSTRUCTIONS | e NEXHO-CR – POWER-CONTROL MODULE
WHEN TROUBLESHOOTING
PLEASE CONTACT THE CUSTOMER CARE OF YOUR SPECIALIST DEALER.
WARNING: Electrical and electronic appliances often contain prescious materials. But they can also contain harmful substances that were
necessary for their function and safety. They can harm the environment if disposed or mishandled. Please help to protect our environment!
Therefore do not dispose of this device in the residual waste. Dispose of this unit in accordance with local regulations. Dispose of the packaging
materials, replacement parts or equipment parts properly.
INDICATION: Subject to technical modications. Changes, errors and misprints shall not be entitled to compensation.
HOW DO I RESET A e NEXHO-CR POWER-CONTROL MODULE?
In order to reset the eNEXHO-CR power-control module, press and hold the installation button for at least 4 seconds. The green
light indicator of the electronic board will ash to indicate that the module has been reset.
Please note that you have to congure the actuator in the eNEXHO system using the eNEXHO-NT internet module in or-
der to be able to use it. For that purpose, consult the chapter on how to power control modules in the home-automation
network of the NEXHO-NT manual.
If you have installed a eNEXHO-CR power-control module in a eNEXHO home-automation installation, once it is reset,
the detector will not perform the actions sent by the eNEXHO-NT internet module until you have re-congured it. To
re-congure it, please consult the manual of the eNEXHO-NT internet module and follow the steps described in the section on
how to install power-control modules in the home-automation network.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etherma eNEXHO-CR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etherma eNEXHO-CR in the language / languages: German as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info