700207
3
Zoom out
Zoom in
Previous page
1/32
Next page
3
Bitte lesen Sie die Bedienungsanleitung vollständig durch, bevor Sie mit der Installation beginnen
und den Verstärker in Betrieb nehmen.
TECHNISCHE DATEN Q-ONEv2 (12V) Q-ONEv2 (24V)
Ausgangsleistung RMS
Ausgangsleistung Max.
Lautsprecherimpedanz
Frequenzgang
Klirrfaktor
Signalrauschabstand
Eingangsempndlichkeit
Eingangsimpedanz
Subsoniclter
Tiefpasslter
Phasenregler
Bass Boost
Audiosignaleingänge
Hochpegeleingänge
Automatische Einschaltfunktion
Betriebsspannung
Sicherung
Abmessungen (B x H x L)
1 x 300 W @ 4 Ohm
1 x 500 W @ 2 Ohm
1 x 700 W @ 1 Ohm
1 x 600 W @ 4 Ohm
1 x 1000 W @ 2 Ohm
1 x 1400 W @ 1 Ohm
1 – 8 Ohm
10 – 250 Hz (-3 dB)
< 0,1 % (80 Hz)
> 90 dB
0,2 – 6 V
20 kOhm (High Level 20 Ohm)
10 – 50 Hz @ 12 dB/Oktave
30 – 250 Hz @ 24 dB/Oktave
0 - 180°
0 - 12 dB @ 45 Hz
2 x Cinch
Per beiliegendem Kabelstecker
Nur über Hochpegeleingänge
+12 V (10 – 16 V), Minus an Masse
2 x 25 A
150 x 50 x 220 mm
1 x 300 W @ 4 Ohm
1 x 500 W @ 2 Ohm
1 x 700 W @ 1 Ohm
1 x 600 W @ 4 Ohm
1 x 1000 W @ 2 Ohm
1 x 1400 W @ 1 Ohm
1 – 8 Ohm
10 – 250 Hz (-3 dB)
< 0,1 % (80 Hz)
> 90 dB
0,2 – 6 V
20 kOhm (High Level 20 Ohm)
10 – 50 Hz @ 12 dB/Oktave
30 – 250 Hz @ 24 dB/Oktave
0 - 180°
0 - 12 dB @ 45 Hz
2 x Cinch
Per beiliegendem Kabelstecker
Nur über Hochpegeleingänge
+24 V (20 – 32 V), Minus an Masse
2 x 15 A
150 x 50 x 220 mm
Technische Änderungen vorbehalten
BESTIMMUNGSGEMÄSSE VERWENDUNG
Q-ONEv2 (12V) ist nur für den Betrieb in einem Fahrzeug mit einer Bordspannung von 12 Volt mit negativer Masse
geeignet. Q-ONEv2 (24V) ist nur für den Betrieb in einem Fahrzeug mit einer Bordspannung von 24 Volt mit nega-
tiver Masse geeignet.
SCHUTZSCHALTUNG
Die POWER LED (Abb. 2,7) leuchtet grün auf, wenn das Gerät betriebsbereit ist.
Die PROTECT LED (Abb. 2,7) leuchtet rot auf, wenn das Gerät überhitzt ist, oder ein Kurzschluss bzw. eine zu
geringe Impedanz an den Lautsprecheranschlüssen anliegt. Wenn dies eintritt, schaltet die integrierte Schutz-
schaltung den Verstärker automatisch aus. Dieser sollte nach Behebung des Problems wieder funktionieren.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ESX Q-ONEv2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ESX Q-ONEv2 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info