469833

Esscom BUTLER E550 Manual

8
Zoom out
Zoom in
Previous page
1/92
Next page
8 Esscom Butler E550 TWIN/TRIPLE
Esscom Butler E550 TWIN/TRIPLE
5.2 Setting the language
Press menu button ÆUse the button to scroll to ‘HANDSET’ and press OK Æ Scroll
to ‘LANGUAGE’ and press
OK Æ Scroll to the language you want with the right or
left button and press
OK .
5.3 Setting the date and time
The date and time are stored inside the base and the answering machine will also use this
date and time for the message recording. (See “10 Answering machine”.)
The date and time can be set by each handset but it’s not needed to set it per handset
individual:
Press menu button ÆUse the right button to scroll to ‘DATE TIME’ and press
OK
ÆEnter the year by the numerical keypad (09 = 2009...) and press OK . ÆEnter the month
by the numerical keypad (01 = January...) and press
OK . ÆEnter the day of the month and
press
OK . ÆEnter the hours (24h format) and press OK . ÆEnter the minutes by the
numerical keypad and press
OK .
5.4 Outgoing calls
5.4.1 Making a phone call
Press the line button . You will hear the dial tone. Æ Enter the desired telephone
number. Æ Press the line button when you want to terminate the call.
5.4.2 Call setup with dial preparation
Enter the desired telephone number. An incorrect number can be corrected by means of the
mute button . When you haven’t pressed a button for 20 seconds, the number you’ve
already entered will disappear and the handset returns to standby mode. ÆPress the line
button . The number will be dialled automatically. Æ Press the line button again
when you want to terminate the call.
5.4.3 Redialling the last number dialled
Press the line button Æ The line/charge indicator (LED) on the base unit will blink.
Æ You will hear the dial tone. ÆPress the redial button . The number you last called is
dialled automatically.
5.4.4 Redial one of the last 3 numbers dialled
Press the redial button . The number you last called appears on the display. If you would
like to dial one of the last 3 numbers dialled, press the redial button a few times until the
desired number appears on the display. Æ Press the line button . Æ The number shown
on the display is dialled automatically. Æ After finishing your call, press the line button to
hang up.
• When removing the base power, you have to set the date and time again!
• If you have CallerID on your telephone line and the operator sends date and
time, your clock will be set automatically on an incoming call.
If you wish to insert a pause, press the redial/pause button on the
location where you want a pause of 3 seconds.
/P
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Esscom BUTLER E550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Esscom BUTLER E550 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info