Manual ESQ Fusion Chronograph (page 1 of 2) (English)

757310

Zoom out

Zoom in

1/2

A chronograph combines two time-keeping functions. It incorporates

a device to measure intervals of time independent of the regular time

shown on the dial. Your ESQ by Movado Fusion Chronograph may be

used to time events up to 10 hours in duration, in 1/10 of-a-second

increments.

Setting the Time:

1. Pull crown out to position 2. (Watch will stop.)

2. Turn crown in either direction to move hands to desired time.

Be sure to take AM/PM into account so that date changes at midnight,

not noon.

3. Push crown back in to position 1. (Watch will restart.)

NOTE: To set time to exact second, pull crown out to position 2

precisely when small seconds hand S reaches <<60>> position.

(Watch stops.) Adjust time to one minute ahead, and take an accurate

time signal, from a radio news station, for example. When audible tone

signals exact time, immediately push crown back in to position 1.

(Watch will restart, now set to the exact time.)

Setting the Date (quick change):

1. Use a pin or small pointed tool to press date corrector button V.

Each press and release will advance date indicator hand F by one

increment.

CAUTION: Do not press and hold corrector button V; holding it down

could jam the date mechanism.

NOTE: If the date is adjusted during the automatic date changing phase

(between 9:00 PM and 00:20 AM), set date to following day.

Setting the Time, Date, Day of week and Month:

1. Pull crown out to position 2. (Watch will stop.)

2. Turn crown in either direction to move hands to correct time, making

sure date changes at midnight, not noon. (To set time to exact

second, see “Setting the time”.)

3. Push crown back in to position 1. (Watch will restart.)

NOTE: Each press and release on corrector buttons will advance setting

by one increment:

4. Use corrector button V (on side of case at 8 o’clock) to advance

Date indicator hand F.

5. Use corrector button W (on side of case at 10 o’clock) to advance

Day of week shown in window D.

6. Use corrector button T (on side of case at 2 o’clock) to advance

Month shown in window J.

Chronograph Function Overview

Use buttons A and B to operate the chronograph. Pressing button A

the first time will start the chronograph. While the chronograph is

running, once the chronograph seconds counter hand C has completed

one turn, minute-counter hand E will jump ahead one minute. Tenths-

of-a-second hand G does not move when the chronograph is running.

Pressing button A a second time will stop the chronograph and move

hand G to the relevant tenth-of-a-second mark. Pressing button B will

reset hands G, E and C to zero. Adjusting the time does not stop the

chronograph, but it does block buttons A and B for as long as the

crown is pulled out.

IMPORTANT: Crown must be in position 1 and hands must be at zero

before chronograph is started. Press button B to reset hands to zero.

Do not push button A or B while crown is pulled to position 2. If but-

ton A or B is accidentally activated while crown is not flush against case,

one or more of the chronograph hands will become de-synchronized.

Should this occur, see directions for synchronizing hands at end of

following instructions.

Simple chronograph functions:

To measure the duration of a single, non-stop event:

1. Press button A to start chronograph.

2. Press button A a second time to stop chronograph, and read the

3 chronograph hands to determine elapsed time, for example:

14 minutes, 37 seconds, 5/10 of a second.

3. Press button B to reset chronograph to zero.

Accumulated time functions:

To measure the combined time of a series of shorter events, for

example the actual playing time of a football game, where play is

repeatedly interrupted:

1. Press button A to start chronograph.

Legend

H - Hour hand

M - Minute hand

S - Small seconds hand

F - Date indicator hand

C - Center-mounted chronograph seconds counter

E - Chronograph minutes counter

G - Chronograph tenths-of-a-second counter

(hour counter after 30 minutes)

D - Day of week display

N - Month display

1, 2 - Crown positions

A - Chronograph start/stop push-button

B - Chronograph reset push-button

W - Day corrector button

T - Month corrector button

V - Date corrector button

MON

MAR

Operating Instructions

ESQ FUSION CHRONOGRAPH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ESQ Fusion Chronograph in the language / languages: English as an attachment in your email.

The manual is 0,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ESQ Fusion Chronograph Manual

Product: