215240
4
Zoom out
Zoom in
Previous page
1/14
Next page
Epson PowerLite 62c/82c Projector
4 - Epson PowerLite 62c/82c Projector 9/05
Image Size and Projection Distance
The distance between the projector and the screen determines
the basic size of the projected image, as shown below. The
diagram shows approximately how big your image will be, based
on where you set up the projector. Because other adjustments—
such as those made with the
Resize and keystone buttons—also
affect the size of the image, the numbers shown in the
illustration should be considered as general guidelines, not exact
measurements.
Use the formulas given below to either find out how large your
image will be when you know the distance from the projector to
the screen, or to find out how far from the screen to place the
projector when you want an image of a certain size. Since the
size of the image can be changed by rotating the zoom ring,
formulas are given for both the minimum and maximum sizes.
To determine the diagonal size (inches) of an image when you
know the projection distance (feet):
Wide: Maximum diagonal size (inches) = 10.126246
×
distance (feet) + 1.166113
Tele: Maximum diagonal size (inches) = 8.443213
×
distance (feet) + 0.916898
To determine the projection distance (feet) when you know the
diagonal size (inches) of the screen image:
Wide: Maximum projection distance (feet) = 0.09875
×
diagonal size (inches) - 0.11516
Tele: Maximum projection distance (feet) = 0.11844
×
diagonal size (inches) - 0.1086
Turning On the Projector
Make sure your projector and other equipment are set up and
connected correctly. Then turn on your projector, as described
below.
If you turn on your connected computer or video equipment
before starting the projector, the projector automatically detects
and displays the image source. If you turn on the projector first,
or have multiple pieces of connected equipment, you may have
to select the image source manually. See “Selecting the Image
Source” on page 6.
Follow these steps to plug in and turn on the projector:
1. Remove the lens cap.
Caution:
Do not use the projector with the lens cap in place. The heat
generated by the lamp can damage the cap.
2. Connect one end of the power cord to the projector’s power
inlet. Then connect the other end to an electrical outlet.
The
Power light on top of the projector turns orange.
3. Turn on your computer or video source if they are not on
already.
4. Press the P
Power button on top of the projector or on the
remote control.
Distance from projector to screen (ft.)
29.5(Wide)–35.4(Tele) ft.
(in.)
19.6–23.6
9.8–11.7
7.8–9.4
5.8–7.0
4.8–5.8
2.8–3.4
3.8–4.6
Power button
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson powerlite 62c at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson powerlite 62c in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson powerlite 62c

Epson powerlite 62c User Manual - English - 113 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info