44542
4
Zoom out
Zoom in
Previous page
1/4
Next page
Useful Functions
Troubleshooting
No images appear: "No signal"
When using a laptop or a PC with an in-built monitor, select external video output on the computer.
Setup examples
Press and hold the [Fn] key, followed by the appropriate function number key.
s User's Guide "Laptop connection"
Checking the indicators
These indicators alert you to problems with projector operation.
s Refer to "When You Suspect a Problem" in the User's Guide for further details.
Color Mode
The following five colour modes can be selected by pressing [Color
Mode] on the remote control.
Dynamic Presentation Theatre Living Room sRGB
s User's Guide
"Selecting a colour
mode"
A/V Mute
Playback of images and sound can be paused and resumed each
time [A/V Mute] is pressed on the remote control.
s User's Guide
"A/V Mute"
Auto Setup
Automatically adjusts the incoming signals when connected to a
computer to obtain optimum images.
s User's Guide
"Adjusting computer
generated Images"
NEC
[Fn]+[F3]
SONY [Fn]+[F7]
Panasonic Fujitsu [Fn]+[F10]
To s hi ba [ Fn ] +[ F5 ]
Macintosh
After start up enable "Mirroring" in
the Monitors Control Panel.
IBM [Fn]+[F7]
Warning indicator lit flashing
Condition Cause/Remedy
Red
High internal temperature (overheating)
The lamp will turn off automatically and
projection will stop. Wait for about 5 minutes,
unplug the power cable and then plug it back
in again. Then press the [Power] button to
turn the projector back on.
Condition Cause/Remedy
Red
(0.5 second
interval)
Lamp problem
Remove the lamp and check if it is broken. If
the lamp is not broken, re-install it. If the lamp
is broken replace by a new lamp, or contact
your local dealer for further advise. *1
Orange
Standby state
The power cable should only be
disconnected in this condition.
Projection starts when you press
the [Power] button. Red
(1 second
interval)
Internal problem
Stop using the projector and send it for
service. *2
Orange
Cool-down in progress
The projector changes to
standby (indicator lights orange)
after about 20 seconds.
Orange
High-speed cooling in progress
If the temperature rises too high again,
projection will stop automatically.
Check that the air filter and air exhaust vent
are clear, and that the internal room
temperature is not too high.
Green
Projection in progress
Green
Warm-up in progress
After warm-up finishes,
projection starts when an image
signal is input.
*1 Contact your dealer for a spare lamp.
*2 For repairs, contact your dealer or the nearest address
provided at "International Warranty Conditions" in
Safety Instructions/World-Wide Warranty Terms.
s User's Guide
"Troubleshooting"
Power indicator lit flashing
Printed in China
03.xx-xx(C01) 404333501 (E)
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EMP-S1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EMP-S1 in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson EMP-S1

Epson EMP-S1 User Manual - English - 75 pages

Epson EMP-S1 Quick start guide - German - 4 pages

Epson EMP-S1 User Manual - German - 77 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info