214408
4
Zoom out
Zoom in
Previous page
1/16
Next page
Do the input signal settings
match the projector settings?
(When connected to the [BNC] port)
Has the computer been set for
dual display?
Were the projector and
computer connected while
their power was already
turned on?
If the connection is made while the power is already turned on, the
function [Fn] key that switches the computer's video signal to external
output may not work. Turn the power for the connected computer and
the projector off and then back on.
Do the input signal settings
match the projector settings?
(When connected to the [BNC] port)
Is the computer display output
set to only the computer's
accessory screen?
The video signals will be output externally.
Change the output setting to an external destination only or to an
external destination as well as the computer's own monitor.
If a problem occurs with the projected images even though the projector is set up and connected
correctly, check the following points.
If the following does not solve the problem
User's Guide "When the Indicators Provide No Help"
Computer documentation, under a title such as
"External output" or "Connecting an external monitor"
Computer documentation, under a title such as "Video driver"
If you cannot select
computer images or the
images do not project
correctly
The computer
cannot be selected
as the image
source
Images appear
greenish or
purplish
Only part of the
images are
displayed
Only part of the
images are
projected
Repeatedly press the button on the remote control or use the
"BNC Input" command in the "Setting" menu to select the format
that matches the equipment signal.
Repeatedly press the button on the remote control or use the
"BNC Input" command in the "Setting" menu to select the format
that matches the equipment signal.
Cancel the dual display setting in the connected computer's Control
Panel.
(Operation) indicator
Flashes green (warm-up in progress/approx. 40 seconds)
Lights green (projection in progress)
Check that the power cable is connected to the projector and
to the electrical outlet.
With the EMP-9300, if you change the setting for the "Direct
Power ON" command in the "Advanced2" menu to "ON", the
projector's power will turn on and projection will start at once
when you insert the power plug into the wall outlet.
First turn the power on for other components that are
connected to the projector.
With the EMP-9300, the Password Protect setting may cause
the password entry screen to be displayed when the power is
turned on. If this happens, enter the password.
Projection starts after a short period.
For a video source, press the [Play] button.
Set the [R/C] switch
to "ON".
Turn the power on
for all input
equipment.
Press the button.
User's Guide
"Turning the Projector On"
Projection Preparation and Adjustments
When the power is first
turned on after attaching the
standard lens or wide angle
zoom lens, continue with the
configuration menu "Reset
All".
If you do not select "Reset
All", the images may appear
slightly dark.
User's Guide
"Reset All Menu"
User's Guide "Preventing theft (Password Protect)"
User's Guide "Advanced2 Menu"
9300E-QRG_03-12
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson emp 9300nl at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson emp 9300nl in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info