543654
90
Zoom out
Zoom in
Previous page
1/130
Next page
Caution
Wait until the lamps have cooled down sufficiently before removing the lamp
cover. If the lamp is still hot, burns or other injuries may result. It takes
about one hour after the power has been turned off for the lamp to be cool
enough.
Attention
Never use the projector unless there are two lamps installed.
We recommend replacing both lamps together to maintain consistent hue
and brightness of projected images.
Procedure
A
After you turn off the projector's power and the
confirmation buzzer beeps twice, disconnect the power cable.
B
Wait until the lamps have cooled down sufficiently before
removing the lamp cover on the back of the projector.
Pinch the tabs on the front of the lamp cover together to release
the lock. When the lock releases, pull the cover straight out.
C
Pull up the lock lever for the lamp you want to replace and
pull the lamp straight out.
If the lamp is cracked, replace it with a new lamp, or contact
your local dealer for further advice.
s Epson Projector Contact
List
A
Lamp 1
B
Lamp 2
D
Install the new lamp.
Insert the new lamp along the guide rail in the correct direction
so that it fits in place, push firmly until it is fully inserted, and
pull down the lock lever until it clicks into place.
Replacing Consumables
90
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EB Z8000WU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EB Z8000WU in the language / languages: English as an attachment in your email.

The manual is 5,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info