You can set the Lamp brightness to one of two settings.
Select ECO if the images being projected are too bright such as when projecting images in a dark room or onto a small screen. When ECO is selected,
power consumption during projection and the lamp life change as follows, and fan rotation noise is reduced. Electrical consumption: about 25%
decrease, lamp life: about 1.4 times longer
Volume
You can adjust the Volume. Setting details are saved for each image signal.
Mic Input Level
Adjust this if the microphone input level is low and the microphone audio output from the projector's speaker is difficult to hear, or if the input level is
too high, resulting in a crackling sound in the audio from the microphone. When Mic Input Level is turned down to 0, no microphone audio is output
from the speaker.
Remote Receiver
You can limit the reception of the operation signal from the Remote Control.
When you want to prohibit operation by Remote Control, or if the Remote Receiver has a fluorescent light too close to it, you can make settings to
deactivate the remote receiver you do not want to use or that is experiencing interference.
User Button
You can select the item from the Configuration Menu with the Remote Control's User Button. By pressing the User Button the assigned menu item
selection/adjustment screen is displayed, allowing you to make one-touch settings/adjustments. You can assign one of the following items to the User
Button.
Power Consumption, Info, Progressive,Test Pattern, Resolution, Mic Input Level, and Pattern Display
Pattern
Pattern Display: Display a pattern.
Pattern Type: You can select from Patterns 1 to 4 or User Pattern. Patterns 1 to 4 display projection lines such as ruled lines or a grid.
Pattern 1:
Pattern 2: Pattern 3: Pattern 4:
User Pattern: Captures a user pattern. sp.70
Test Pattern: When the projector is set up, a test pattern is displayed so that you can adjust the projection status without connecting equipment. While
the Test Pattern is displayed, zoom, focus adjustments, and Keystone correction can be performed. To cancel the Test Pattern, press the [Esc] button on
the Remote Control or the Control panel.
Attention
If a pattern is displayed for a long time, a residual image may be visible in projected images.
Reset
You can reset all adjustment values in the Settings Menu to their default settings, except for User Button.
To return all menu items to their default settings, see sp.91
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Epson eb 450w at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Epson eb 450w in the language / languages: English as an attachment in your email.
The manual is 6,03 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
