609379
22
Zoom out
Zoom in
Previous page
1/24
Next page
48
IP2160EN - 2015-05-08
DETACH AND DELIVER TO THE CUSTOMER
Troubleshooting / alarms
Problem Possible cause
The gate doesn't open or close
No power
Short-circuited accessories
Contact Technical Service
Blown line fuse
Contact Technical Service
Release door microswitch open Check the position of the key.
Close the release door if it's open.
Contact Technical Service
Mechanical fault
Contact Technical Service
Faulty motor
Contact Technical Service
Faulty control panel
Contact Technical Service
The gate opens/closes a short way,
and then stops
Friction is present
Contact Technical Service
The remote control has limited range
and doesn't work while the gate is
moving.
The batteries are running down. Replace them.
The flashing light is not working
The lamp has blown. Replace it.
The wires are damaged or detached, or have short-circuited.
Contact Technical Service.
The "gate open" indicator light doesn't
work
The lamp has blown. Replace it.
The wires are damaged or detached, or have short-circuited.
Contact Technical Service.
If the problem persists, contact Ditec ENTREMATIC Technical Service, explaining the type of
alarm indicated by the LEDs.
G
G
G
R
R
R
Y
Y
Y
OFF No power supply.
G
1 flash
every 5s
Mains power supply present, but gate
stopped and waiting for commands. Any
external faults are not detected by the di-
agnostic LEDs.
G
flashing
in sync with
LAMPH
Mains power supply present, normal
operation. Flashing LED in sync with
FLASHING LIGHT.
Y
1 flash
every 10s
No mains power supply (battery-powered
operation).
Y
steady on
Maintenance request (alarm V0 on the
display)
R
steady on Release door open
R
1 flash
every 1s
Permanent alarm (see ALARMS and/or
TROUBLESHOOTING).
Signalling and alarms (for Ditec NEOS
+
only)
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Entrematic Ditec NeoS plus - IP2160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Entrematic Ditec NeoS plus - IP2160 in the language / languages: English as an attachment in your email.

The manual is 5,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Entrematic Ditec NeoS plus - IP2160

Entrematic Ditec NeoS plus - IP2160 User Manual - German - 24 pages

Entrematic Ditec NeoS plus - IP2160 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info