632466

Entone Kamai Hybrid 510 Series Manual

3
Zoom out
Zoom in
Previous page
1/16
Next page
COPYRIGHT
2012 ENTONE, INC. ALL RIGHTS RESERVED
.
Kamai Quick Reference (P/N 95-89xxxx-00)
v1.1
3
6. Manually Program Additional Devices
Perform the following steps to program the TV and AUX device:
1. Locate the device code for your desired device in the device code table provided in the Appendix. If
you could not find the device code for your device or it does not work after trying the listed device
codes for your device brand, then you can go to the next section to try the auto-search procedures.
2. Turn on your device and with media inserted (if applicable).
3. On the remote control, press a device mode key for 5 seconds (i.e., “TV” or “AUX”). The device
mode key will light up.
NOTE: Use the “AUX” mode key to program control of VCR, DVD player, cable box, satellite set-
top-box and audio device.
4. Enter the four-digit device code for you device. If you perform this procedure correctly, the selected
device mode key backlight will blink twice. NOTE: If you enter an invalid device code, the selected
device mode key will fast blink 7 times. Device program mode will be terminated.
5. Aim the remote control at your device and press the “POWER” once. The device should be turned
off. If it does not respond, repeat the above steps.
7. Auto-Scan (Program Additional Devices)
If your device does not respond to the remote control after trying all devices codes listed for you brand,
or if your brand is not listed at all, try searching for your device code as follows:
1. Power on the device and on the remote control, press a device mode key (i.e., “TV” or “AUX”) and
hold for 5s. The device mode key will light up.
NOTE: Use the “AUX” mode key to program control of VCR, DVD player, cable box, satellite set-
top-box and audio device.
2. Press the “POWER” key once and aim your new remote at the device.
3. Press either the “CH UP” key or “CH DOWN” key to do device auto-scan.
4. In this search mode, the remote control will send IR codes from the library in 5 second intervals.
The device key will be on and blink every 5 seconds while in the device scan mode.
5. If the device turns off, a working code has been found. Press “OK” once to lock in the code. The
selected mode key will blink twice.
6. If all code sets of that device are exhausted in the search and the “OK” is not pressed, the selected
device key will fast blink 7 times and the search mode will be terminated.
Appendix - Device Codes
Your Universal Remote Control (URC) can control many brands and models of television, VCR, DVD
and other types of audio-visual equipment. The following pages list device codes for many categories
and brands of equipment. Many brands list more than one code, and you may need to test several codes
to find the best match for your equipment. If you cannot locate your brand, or none of the listed device
codes works, then you may still use the auto-scan feature to try to locate a suitable device code.
TV - Digital TV
Philips 0152, 0015, 0038
Samsung 0003
Sony 0032, 0008, 0217
TV - HT Projector
Mitsubishi 0052
Panasonic
0035
Philips 0113
Sanyo 0225
Sharp 0082
Sony 0085, 0151
Toshiba 0020
TV - LCD Projection TV
Sharp 0074
Sony 0108
Toshiba 0233
TV - LCD TV
Bush 0172
Daewoo 0037
Denver 0147
Goodmans
0006
Hitachi 0235
JVC 0218
LG
0188, 0263, 0264,
0055, 0062, 0210,
0220, 0262, 0013,
0096, 0173, 0208,
0122
Matsui 0243
Panasonic
0203, 0144, 0265
Philips 0039, 0192
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Entone Kamai Hybrid 510 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Entone Kamai Hybrid 510 Series in the language / languages: English as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Entone Kamai Hybrid 510 Series

Entone Kamai Hybrid 510 Series Quick start guide - English - 8 pages

Entone Kamai Hybrid 510 Series User Manual - English - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info