693628
2
Zoom out
Zoom in
Previous page
1/6
Next page
1 Input: Input¼" unbalanced input. Plug your guitar cord in here.
2 Clean: Input sensitivity control (Gain) for the Clean and the Crunch channels.
(Clean: set the Gain-button 11 to the Lo position, Crunch: set the Gain-button 11 to the Hi position).
A TIP from the Designer: Gain settings depend on what type of pickups are installed in your guitar.
The recommended setting for humbuckers or active pickups lies between the 10 and 1 oclock
positions and 12 to 3 oclock for single coils for a pure clean response; the Gain button must be in
the OFF-position.
3 Bright: Alters the EQ by boosting the upper treble range; effectiveness decreases at higher
Gain (2,4) settings; the Bright feature affects all channels.
A TIP from the Designer: For a crisp glassy tone, set the Bright switch to the On position. This
setting boosts the treble response of muddy pickups.
4 Lead: Gain control pot for the Soft Lead channel and the Heavy Lead channel. It controls the amount
of preamp overdrive in the Lead mode. (Soft Lead: set the Gain-button 11 to the Lo position, Heavy
Lead: set the Gain-button to the Hi position).
CAUTION: Extremely high gain and volume levels in the Lead mode can produce
strong feedback. Avoid feedback squeals, they lead to hearing loss and damaged speakers!
A TIP from the Designer: To get Crunch-sounds and Rhythm-sounds set this control between
the 9 and 12 o´clock´s position (depending on the type of pick-up) and leave the Gain 11 pusbutton
in the Off-position.
5 Bass: Bottom end voicing control of the preamps´s passive EQ.
6 Middle: Mid-range voicing control of the preamp´s passive EQ.
7 Treble: Upper range voicing control of the preamp´s passive EQ.
A TIP from the Designer: To get an idea of this amp's capabilities, I suggest you set the tone control
pots Bass (5), Middle (6), Treble (7) and Lead Presence (8) to the 12 o'clock position. For extremely
soft lead, blues or jazz sounds, try setting the Treble knob to somewhere in the 8-to-11 o'clock range.
For aggressive metal riffs or spanky funk sounds, go for something in the range of 11 to 3 o'clock.
8 Lead Presence: This control defines the Treble response in the poweramp stage for
the Lead channel.
A TIP from the Designer: When you've adjusted the amp to relatively loud levels and high Gain
settings reduce the amount of Lead Presence (8) and Treble (7) to prevent annoying feedback that is
generated when your guitar's pickups and the speaker interactsomething in the 8-to-12 o'clock
range should do just fine.
9 Reverb: Reverb control, adjusts the portion of the reverb signal and increases reverb intensity
if you rotate it clockwise; the reverb can be switched on/off via the respective footswitch connected
to jack 19 or 21.
Frontpanel
1
2
34
56
7
8
910
11 13 14
12
Screamer 50 - delivers the sonic goodstons of tone and palette of hip sounds from squeaky clean
to hi-gain shred and everything in between. This all-tube beast is your first choice for many different
sound styles! With a host of practical features and a clearly-arranged control panel, handling this amp is a
piece of cake. The Screamer's opulent visuals are certainly arresting, but its unique, creamy tube tone and
silky spring reverb truly set this amplifier apart. The Screamer comes complete with a bit of technical
wizardry which you'll find useful where it counts mostout there in the real world of rehearsing and
gigging. Among these features are a Lo/Hi Gain switch, which in effect doubles your choice of channels
from twoClean and Leadto fourthe afore-mentioned, plus Crunch and Heavy Lead. You also get two
different connection systems for different footswitches-conventional ¼" jacks as well as a port for the
ENGL compact footswitch Z-5 (optional). And then there's the ingenious feature "V.L.S.", an adapted
version of the extremely popular and highly practical Master A/B switching circuit found on high-end
ENGL heads.
Quality components, excellent workmanship and strict quality control ensure this amp retains its value.
You'll find guidelines on care and maintenance of tube amps on the last page of the manual.
Please read and heed these before operating your amp. You'll also come across boxes shaded grey
throughout the manual. These are located between the descriptions of the amp's functions and
contain handy tips on the preceding function. All critical information pertaining to the operation of
this amp is preceded by "NOTE" or "CAUTION." Please pay particular attention to these safety tips.
The ENGL team wishes you all the bestmay you and your amp enjoy a "harmonically rich" future
together!
Clean
Lead
Reverb
Lead
Volume
MasterClean Lead Bass Middle Treble
PowerStand By
Bright
Screamer 50
Gain
Lo/Hi
Amp
Tub e
Input
15
Lead
Presence
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Engl Screamer 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Engl Screamer 50 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info