660387
11
Zoom out
Zoom in
Previous page
1/14
Next page
General Operation
17
Typical Set up - Charging Out-of-Vehicle
WARNING - Read and Follow all INSTRUCTIONS. FAILURE TO FOLLOW INSTRUCTIONS
MAY CAUSE SERIOUS INJURY, DAMAGE OR EXPLOSION, ALWAYS WEAR SAFETY
GLASSES.
Read and follow all General and Personal Safety Precautions in this manual and those
by the battery manufacturer.
Read and follow all the preparing-to-charge steps for out-of-vehicle battery charging.
For charging or maintaining a battery that is out of a vehicle, please find below a general
illustration for connecting your charger. General illustration is for an out-of-vehicle set up.
a. Attach a 60 cm 6-gauge (awg) insulated battery cable to the NEGATIVE (NEG, N, )
battery post.
b. Connect the red POSITIVE (POS, P, +) cable clamp to the POSITIVE (POS, P, +) post.
c. Connect the black NEGATIVE (NEG, N, ) Lead Cable cable clamp to the 60 cm
6-gauge cable coming from the NEGATIVE (NEG, N, ) battery post on the end which
is 60 cm away from the battery.
d. Plug the charger into a properly grounded fault protected outlet.
General Operation
18
Typical Set up - 6 AMP MODEL ONLY Ring Terminal Charge and Maintain Cable
WARNING - Read and Follow all INSTRUCTIONS. FAILURE TO FOLLOW INSTRUCTIONS
MAY CAUSE SERIOUS INJURY, DAMAGE OR EXPLOSION, ALWAYS WEAR SAFETY
GLASSES.
Read and follow all General and Personal Safety Precautions in this manual and those
by the battery manufacturer.
Read and follow all the preparing-to-charge steps for in or out-of-vehicle battery
charging.
The ODYSSEY
®
Battery 6 Amp Portable Charger Model OBC- 6A is equipped with a quick
disconnect DC output cable to allow for quick and easy connection to its ring terminal
cable assembly ideal for keeping smaller batteries charged and maintained or for maintaining
larger charged batteries.
Please find below a general illustration for using the supplied ring terminal cable assembly on
the 6 amp Portable Charger model only. General illustration is for an out-of-vehicle set up.
i. Connect the red POSITIVE (POS, P, +) ring terminal to the POSITIVE (POS, P, +) post
on the battery followed by making the quick connection to the red POSITIVE
(POS, P, +) bullet connector lead on the 6 Amp Portable Charger.
ii. Connect the black NEGATIVE (NEG, N, ) ring terminal to the NEGATIVE (NEG, N, )
post on the battery followed by making the quick connection to the black NEGATIVE
(NEG, N, ) bullet connector lead on the 6 Amp Portable Charger.
iii. Plug the charger into a properly grounded fault protected outlet.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Enersys ODYSSEY Battery Charger at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Enersys ODYSSEY Battery Charger in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info