633571

Energetics Basic Bench 1.1 Manual

5
Zoom out
Zoom in
Previous page
1/28
Next page
5
- The home exerciser should not be used or stored in a moist area
because of possible corrosion.
- Check at least every 4 weeks that all connecting elements are tightly fitted and in good condition.
- In case of repair please ask your dealer for advice.
- Replace defective components immediately and/or keep the equipment out of use until repair.
- Only use original spare parts for repair.
- Use a damp cloth to clean the Home Exerciser and avoid the use of aggressive detergents when
cleaning the Home Exerciser.
- After exercising, immediately wipe of the sweat; perspiration can ruin the appearance and proper
function of the Home Exerciser.
- The following tools are required for assembly: Two adjustable wrenches and Allen Wrenches.
- Always only use Carriage Bolt to insert through the SQUARE hole on component that needs to be
assembled. Attach washer only to end of the Carriage Bolt.
- Always only use Allen Bolts or Hex Bolts insert through the ROUND hole on component that need to
be assembled.
- Always wait until all bolts are installed to the component and then fasten the bolts. Do not fasten each
bolt right after it is installed.
- ASSEMBLED DIMENSION: L 167.8 x W 81.7 x H 122.9 CM
Symbols shown in Assembled Instruction:
Fasten Nuts and Bolts.
After all components and hardware have been assembled in current and
previous steps. Securely tighten all Nuts and Bolts.
NOTE: Do not over tighten any component with pivotal function. Make
sure all pivotal components are able to move freely.
Do not tighten all Nuts and Bolts in this step yet.
When Fasten Nuts and Bolts symbol appeared in next step, then make sure to
fasten all Bolts that have been installed.
Care and Maintenance
Assembly notes
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Energetics Basic Bench 1.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Energetics Basic Bench 1.1 in the language / languages: English, Danish, French, Swedish, Finnish as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info