1) * This product requires special attention with regard to EMC (electromagnetic compatibility) and must be installed and commissioned in accordance with the
EMC information provided. This device can be aected by portable and mobile radio frequency (RF) communication devices.
2) * Do not use a mobile phone or other devices in the vicinity of the blood pressure monitor that emit electromagnetic elds. This can lead to malfunction.
3) * Warning: This blood pressure monitor has been thoroughly tested and inspected to ensure proper performance and operation!
4) * Warning: This device must not be used in the vicinity of other devices. If use alongside other devices is required, the blood pressure monitor should be
observed to verify normal operation.
Guidance and manufacture’s declaration – electromagnetic emission
The device is intended for use in the electromagnetic enviroment specified below.
The customer of the user of the device should ensure that it is used in such an environment.
The device use RF energy only for its internal function.
Therefore, its RF emissions are very low and are not
likely to cause any interference in nearby electronic
equipment.
RF emissions CISPR 11Class BThe device is suitable for use in all establishments,
including domestic establishments other than domestic
and those directly connected to the public low-voltage
power supply network that supplies buildings used for
domestic purposes.
Harmonic emissions IEC61000 - 3 -2Not applicable
Voltage fluctuations / flicker emissions
lEC61000-3- 3Not applicable
Recommended separation distances between portable and mobile RF communications equipment and the device
The device is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the device can
help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters)
and the device as recommended below, according to the maximum output power of the communications equipment.
Rated maximum output power
of transmitter (W)
Separation distance according to frequency of transmitter (m)
150 kHz to 80 MHz
d = [ 3.5
–
V1 ] √P
80 MHz to 800 MHz
d = [ 3.5
–
V1 ] √P
800 MHz to 2 GHz
d = [ 7
–
V1 ] √P
0.010.120.120.23
0.10.380.380.73
11.21.22.3
103.83.87.3
100121223
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in metres (m) can be estimated using the
equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer.
Note 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
Note 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Emporia BPM-V20-B at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Emporia BPM-V20-B in the language / languages: English as an attachment in your email.
The manual is 0.34 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
