682494
78
Zoom out
Zoom in
Previous page
1/82
Next page
72
Trouble
shooting guide
Problem
Cause
Correction
Reference
Seam
puckering
1.The needle thread tension is too tight.
1.Loosen the thread tension.
Page 19
2.The needle thread is not threaded
correctly.
2.Rethread the machine.
Page 13
3.The needle is too heavy for the fabric
being sewn.
3.Choose a needle to suit the thread and
fabric.
Page 22
4.Shorten stitch length is too long for the
fabric.
4.Make stitch dense.
Page 27
Patterns are
distorted
1.The correct presser foot is not used.
1.Select the correct foot.
Page 73
2.The needle thread tension is too tight.
2.Loosen the thread tension .
Page 19
3.The stitch length is not suitable for the
fabric being sewn.
3.Make stitch adjustment.
Page 27
The machine
jams
1.Thread is caught in the hook.
Remove the upper thread and bobbin
case. Turn the handwheel backwards
and forwards by hand and remove the
thread remnants.
Page 69
2.The feed dogs are packed with lint.
The machine
is noisy
1.Lint or oil have collected on the hook or
needle bar.
1.Clean the hook and feed dog as
described.
Page 69
2.The needle is damaged.
2.Replace the needle.
Page 23
3.Slight humming sound coming from
internal motor.
3.Normal
--
4.Thread is caught in the hook.
Remove the upper thread and bobbin
case. Turn the handwheel backwards
and forwards by hand and remove the
thread remnants.
Page 69
5.The feed dogs are packed with lint.
Uneven
stitches,
uneven feed
1.Poor quality thread.
1.Select a better quality thread.
Page 22
2.The bobbin case is threaded wrong.
2.Remove the bobbin case, the thread
and reinsert correctly.
Page 12
3.Fabric has been pulled.
3.Do not pull on the fabric while sewing,
let it be taken up by the machine.
--
The sewing
machine
doesn't
operate
1.The machine is not turned on.
1.Turn on the machine.
Page 9
2.The Start/stop button was not pressed.
2.Press the Start/stop button.
Page 24
3.The presser foot lifter is raised.
3.Lower the presser foot lifter.
Page 17
4.The Start/stop button was pressed,
even through the foot controller is
connected.
4.Do not use Start/stop button when the
foot controller is con-nected. To use
Start/stop button, disconnect the foot
controller.
Page 24
5.A thread is caught in the hook race.
5.Remove the upper thread and bobbin
case. Turn the handwheel backwards
and forwards by hand and remove the
thread remnants.
Page 69
6.The machine is not plugged in.
6.Connect the power line plug to the
electric outlet.
Page 9
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Empisal EES50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Empisal EES50 in the language / languages: English as an attachment in your email.

The manual is 6,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info