612440
1
Zoom out
Zoom in
Previous page
1/2
Next page
| SNELLE INSTALLATIE GIDS | QUICK INSTALL GUIDE | SNELLE INSTALLATIE GIDS | QUICK INSTALL GUIDE | SNELLE INSTALLATIE GIDS | QUICK INSTALL GUIDE | SNELLE INSTALLATIE GIDS
EM6641 e-Domotica Wireless Fall Detection / Draadloos Valalarm
www.e-domotica.com
EM6641 Valalarm
EM6642 Fall Detection
Benodigdheden:
Platte kleine schroevendraaier
Boormachine indien u gaten dient te boren in een betonnen wand
EM6515 Interface koppeling en
EM6505 e-Centre Basisstation met Touchscreen of EM6506 e-Centre Whitebox basisstation
Montageplaats alarmontvanger bepalen
Bepaal een geschikte locatie voor de montage van de alarmontvanger, bij voorkeur een centrale locatie
om daarmee een optimale ontvangst te verkrijgen. Bijvoorbeeld in de woonkamer. Er dient een dubbele
230V wandcontactdoos aanwezig te zijn voor het aansluiten van de adapter en het aansluiten van de
EM6515 Interface link met het e-Centre.
Monteer de alarmontvanger niet aan of dicht bij metalen kasten of andere draadloze zendapparatuur
omdat dit de draadloze verbinding negatief kan beïnvloeden.
1. Schroef de bovenkant los van de bodemplaat van de (2 schroeven).
2. Markeer met behulp van de bodem en een stift of potlood twee gewenste
boorgaten.
3. Indien de alarmontvanger aan een betonnen wand wordt gemonteerd: Boor
met een 6mm boor twee gaten van ruim 5cm diepte in de wand. Steek daarna
de bijgeleverde pluggen in de gaten
4. Bevestig de bodemplaat met de schroeven aan de muur.
5. Zet de bovenkant weer op de bodemplaat. Haal de bovenkant over de twee
nokjes van de bodemplaat en schroef deze vast met de twee schroeven.
6. Sluit de voedingskabel van de adapter aan op de rechter RJ12 ingang (zie
afbeelding).
7. Sluit de datakabel aan op de linker RJ12 ingang. Dit is het potentiaalvrije signaleringsrelais. Sluit de
NO draad (Normally Open, rood) en de COM draad (common, zwart) aan op de witte potentiaalvrije
contacten van de EM6515. De groene draad en gele draad worden in deze situatie niet gebruikt.
Let op! Het potentiaalvrije signaleringsrelais is NIET geschikt om 230V netspanning te schakelen.
Z.o.z.
Equipment needed:
Small flat screwdriver
Drilling machine if you need to mount the device on a concrete wall
EM6515 Interface Link
EM6505 e-Centre Base station with touch screen or EM6506 e-Centre Whitebox
Determine mounting location
Determine a proper location to mount the alarm receiver, a central location is recommended to have an
optimal wireless reception throughout the house. For example in the living room. You need to have a
double mains outlet in the area to plug in the adapter of the alarm receiver and to plug in the power cable
of the EM6615 e-Domotica interface link.
Do not mount the alarm receiver too close to or on metal cabinets or other wireless transmitters, to avoid
interference with the wireless connection.
1. Unscrew the (top) cover of the alarm receiver (2 screws).
2. Mark the desired drill holes using the bottom part and a marker or pencil.
3. If you need to mount the alarm receiver on a concrete wall: Drill two holes with
5cm depth using a 6mm drill. Next, plug in the dowels.
4. Mount the bottom part to the wall using the screws.
5. Mount the (top) cover onto the bottom part. Use the two notches on the top side
to mount it correctly. Screw both parts together with the two screws.
6. Connect the power supply (adapter) onto the right hand sided RJ12 socket.
7. Connect the data cable to the left hand sided RJ12 socket. This is a potential free
signal relay. Connect the NO wire (Normally open, red) and the COM wire
(common, black) to the white potential free wires of the EM6515. The green and
yellow wires are not used in this situation.
Note! The potential free signal relay is not suitable to switch 230V mains power.
P.t.o.
Fall Detection
Valalarm
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eminent EM6641 e-Domotica at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eminent EM6641 e-Domotica in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eminent EM6641 e-Domotica

Eminent EM6641 e-Domotica User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info