If you do not have enough electrical skills, do not continue and let a certified electrician do the job for you. Otherwise you might get injured
and/or electrocuted.
Observe the country specific regulations.
Risk of fatal injury from electrical current.
The output may carry an electrical current even when the load is switched off. Always disconnect the fuse in the incoming circuit from the supply
before working on connected loads.
Neutral wire required
To install this relais switch insert, you need to have a neutral wire on the mounting location.
Contact pins
Caution: The contact pins on the rear of the sensor module or sensor cover can become bent if they are tilted excessively. Therefore always
hold them as straight as possible when inserting.
Add the device to your e-Domotica e-Centre Base Station
Follow the steps below to include the devices to your e-Domotica system. You might need to enable ‘Normal/High power’ (below the ‘Include’
button). This option is available to include devices on a greater distance.
1.Make sure your computer is completely started and connected to the same network.
2.Open your computer’s web browser.
3.Enter “http://ecentre” in the address bar of your web browser and press the ‘Enter’ key on your keyboard.
4.The webpage of the e-Centre will be shown. Log in with your PIN code or the default PIN code 1234.
5.Go to the ‘e-Domotica Products’ page.
6.Click the ‘Include’ button. The e-Centre will start to search for new e-Domotica devices.
7.Press the sensor button on the switch three times within 1,5 seconds.
8.A message will appear: ‘Product found’.
9.Give the connected and found device a name, choose a location, select an image and click ‘Save’.
10.The switch has now been added to the e-Centre. The e-Centre will now be able to control the switch.
If the device is not found, press the ‘Exclude’ button in the e-Centre’s webpage and then click the button on your switch. After this procedure you
can add the new device correctly. Go back to step 6. to continue
Service and support
Go to the e-Domotcia website for more support, i.e. an advanced manual of this device, but also instruction video’s, practical
examples, warranty conditions, frequently asked questions and contact information for our helpdesk.
Scan the QR code or go to: http://www.e-domotica.com/en/customer-service
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Eminent EM6616 e-Domotica at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Eminent EM6616 e-Domotica in the language / languages: English as an attachment in your email.
The manual is 0,09 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
