499618
6
Zoom out
Zoom in
Previous page
1/9
Next page
6 | ENGLISH
Figure 5
1. Check if the mains is switched off using a insulated phase tester for example.
2. Figure 5: Pull the fuse holder out towards the front and replace fuse C
(replacement fuse D).
6.0 How to clean the sensor cover
Attention:
cleaning with detergents or wet cloths can damage the device. Only ever clean the
device with a dry cloth.
7.0 What should I do if there is a problem?
The load cannot be operated locally using the sensor cover.
Make sure that the sensor cover is properly attached to the insert.
The load cannot be operated using the transmitter button.
Make sure that the maximum range is not exceeded and that there are no metal
surfaces such as metal cabinets or similar in the Z-wave transmission path. If you
want to check whether the problem is due to the transmission path, carry the
transmitter to the receiver and connect it there.
7.1 Resetting the sensor cover to the factory settings
Under certain circumstances, it may be necessary to reset the sensor cover (and, as
the case may be, the other devices in the Z-wave system) to its factory settings
and to reconfigure the Z-wave system:
1. Press the sensor cover three times within approx. 1.5 seconds. The connected
load briefly changes its switching state once.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eminent EM6615 e-Domotica at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eminent EM6615 e-Domotica in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eminent EM6615 e-Domotica

Eminent EM6615 e-Domotica User Manual - German - 9 pages

Eminent EM6615 e-Domotica User Manual - Dutch - 9 pages

Eminent EM6615 e-Domotica User Manual - French - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info