612431
11
Zoom out
Zoom in
Previous page
1/14
Next page
11 | ENGLISH
Warning: We advise to mount the flood detector transmitter at least 1.5 meter above
ground for optimal wireless communication and to avoid the flood detector transmitter
come into contact with flood. The transmitter should never be submerged in flood!
7.0 Testing the Flood Detector
Now the flood detector has been assigned to your e-Centre, has been setup as an
alarm sensor for the Water alarm and is mounted on its place, you can test the flood
detector.
Fill a small cup with water and insert the sensor head pins into the water. If correct,
the flood detector will give a beep sound and the orange LED will be flashing. The e-
Centre will be triggered and start the Water alarm, depending on the settings you have
made in the e-Centre’s webpage.
If you have assigned a siren (such as the EM6575) to the e-Centre, the siren will also
make a sound, depending on the settings you have made for this product in the e-
Centre’s webpage and the portal.
Depending on the settings on the e-Domotica Portal, you (and/or added contact
persons) will receive notifications via phone, SMS and/or e-mail.
Tip: If you or your contact persons do not receive any notifications at all, please check
your settings in the webpage of the e-Centre and in the e-Domotica Portal.
8.0 Z-wave commands
Inclusion:
Have your Z-wave Controller entered inclusion mode; press the On/Off button of the
Built-In switch three times.
Exclusion:
Have your Z-wave Controller entered exclusion mode; press the On/Off button of the
Built-In switch three times. Once the node has been excluded, the LED will go into an
interval of two seconds on and two seconds off.
Reset:
Press the On/Off button three times to enter inclusion mode. Within one second, press
On/Off button again until LED is off. The home ID and node ID will be cleared and
reset to factory default
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eminent EM6592 e-Domotica at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eminent EM6592 e-Domotica in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eminent EM6592 e-Domotica

Eminent EM6592 e-Domotica User Manual - German - 14 pages

Eminent EM6592 e-Domotica User Manual - Dutch - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info