612427
2
Zoom out
Zoom in
Previous page
1/2
Next page
| SNELLE INSTALLATIE GIDS | QUICK INSTALL GUIDE | SNELLE INSTALLATIE GIDS | QUICK INSTALL GUIDE | SNELLE INSTALLATIE GIDS | QUICK INSTALL GUIDE | SNELLE INSTALLATIE GIDS
EM6515 e-Domotica Interface Link
www.e-domotica.com
Toevoegen aan een e-Domotica e-Centre
1. Start de computer, open een webbrowser (Internet Explorer, Firefox, Chrome)
2. Open de webpagina van uw e-Centre, via http://ecentre of via het IP adres van uw e-Centre.
3. Log in met uw PIN code of de standaard PIN code 1234.
4. Ga naar de ‘e-Domotica Producten’ pagina.
5. Klik op ‘Toevoegen’ om de leermodus te starten. Het e-Centre zal nu luisteren naar
beschikbare Z-wave apparaten.
6. Druk drie keer op de EM6515 knop binnen 1,5 seconden om het apparaat toe te voegen aan
uw e-Centre.
7. Het apparaat wordt herkend, waarna een nieuwe pagina verschijnt om het apparaat in te
stellen.
8. Geef een naam voor het apparaat.
9. Selecteer een locatie uit de lijst (waar de EM6515 uiteindelijk gemonteerd gaat worden).
10. Selecteer een pictogram.
11. Klik op ‘Opslaan’.
Sluiten en monteren van de EM6515
1. Haal de stekker los en neem de EM6515 mee naar de montageplek.
2. Monteer de EM6515 op de gewenste locatie.
3. Gebruik de meegeleverde tie wrap als trekontlasting voor de kabel van het aan te sluiten
apparaat. Knip eventueel tie wrap af.
4. Plaats het deksel terug op de doos om het te sluiten.
5. Sluit de elektriciteitskabel aan op een 230V stopcontact.
Add the EM6515 to e-Domotica e-Centre
1. Start your computer, open a web browser (Internet Explorer, Firefox, Chrome)
2. Go to the webpage of your e-Centre, using http://ecentre or the IP address of your e-Centre.
3. Login using your own PIN code or the default PIN code 1234.
4. Go to the ‘e-Domotica’ Products’ page.
5. Click ‘Include’ to start the learn mode, the e-Centre will now listen for available Z-wave
devices.
6. Press on the button of the EM6515 three times within 1,5 seconds to include it to your e-
Centre.
7. The e-Centre webpage will detect the EM6515, a new page will appear to edit the device.
8. Enter a desired name.
9. Select a location where this device will be mounted or used.
10. Select an icon.
11. Click ‘Save’.
Closing and mounting the EM6515
1. Unplug the power cable and take the EM6515 to the mounting location.
2. Mount the EM6515 on the desired location.
3. Use the enclosed tie wrap as a cable strain relief for the wire to the connected device.
4. Place the lit back on the junction box to close it again.
5. Plug in the power cable to a 230V wall or power socket.
Support
Find more support on our website (online manuals, instruction videos, download, examples etc.). Scan the QR code or go to:
http://www.e-domotica.com/en/customer-service
Ga naar onze website voor meer ondersteuning (online handleidingen, instructie video’s, downloads, voorbeelden etc.). Scan de QR code of ga naar
http://www.e-domotica.com/nl/klantenservice
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eminent EM6515 e-DOMOTICA INTERFACE LINK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eminent EM6515 e-DOMOTICA INTERFACE LINK in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info