701646
5
Zoom out
Zoom in
Previous page
1/22
Next page
- 4 -
FN-111492.3 EN
PARTS DESCRIPTION
1. Front fan guard
2. Fan blade
3. Base
4. Speed buttons
ASSEMBLING INSTRUCTION
1. Attach the fan body into the base; secure with the four screws provided.
2. Unscrew the blade locking nut and the grill retaining ring from the motor shaft.
3. Put the rear fan guard on the motor shaft and screw together with the grill retaining ring.
4. Insert fan blade onto shaft ensuring blade fits properly onto clip on shaft. Tighten blade locking nut onto
shaft.
5. Put on the front fan guard and then close the clips using the appropriate screw to secure the grille
together.
OPERATING INSTRUCTIONS
1. Plug the power cord into a suitable socket.
2. Oscillation: to make the fan head oscillate, push down the Oscillation knob. To stop the fan head from
oscillating, pull-up the Oscillation Knob.
3. The fan is switched on using the push buttons on the control panel, i.e. 0: Off, 1 = low speed, 2 = medium
speed, 3 = high speed.
CAUTION: Press only one of the speed control button at a time. Permanent damage to the switch housing may
result if two or more of the buttons are pressed simultaneously.
CLEANING
1. Before servicing the fan and after each occasion of use, switch off the appliance and unplug the mains
cable from the socket.
2. Never immerse the appliance in water (danger of short-circuit). To clean the appliance, only wipe it
down with a damp cloth and then dry it carefully. Always take out the mains plug first.
3. Take care that excessive dust does not build up in the air-intake and air-outlet grille, and clean it
occasionally using a dry brush or vacuum cleaner.
TECHNICAL DATA
Supply voltage: 220-240V ~ 50Hz
Power consumption: 40W
Eco design requirements
Product information requirements
Maximum fan flow rate (F)
36.05 m³/min
Fan power input (P)
28.34 W
Service value (SV)
1.27 (m³/min)/W
Measurement standard for service value
(EU) No 206/2012
IEC 60879: 1986
EN 50564: 2011
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Emerio FN-111492.3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Emerio FN-111492.3 in the language / languages: English, German, Dutch, Swedish, Finnish as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info