701619

Emerio FN-110143 Manual

5
Zoom out
Zoom in
Previous page
1/32
Next page
- 4 - FN-110143
PARTS DESCRIPTION
1. Fan guard
2. Fan blade
3. Set screw
4. Screw
5. Rear guard
6. Motor
7. Connector
8. Column holder
9. Stand pillar
10. Cross base
11. Ring
12. Base locking screw
ASSEMBLING INSTRUCTIONS
1. Unscrew the base locking screw (12) and ring (11) from the stand pillar (9). Then insert the stand pillar (9)
through the hole in the center of the cross base (10).
2. Tighten the base (10) and stand pillar (9) by screwing back the ring (11) and the base locking screw (12).
3. The motor (6) and connector (7) have been already assembled, place the connector (7) onto the column
holder (8), and then tighten with two provided fasten screws.
4. Hang the fan rear guard (5) to the motor (6), and then fasten it with 4 screws (4).
5. Slide the fan blade (2) onto the motor shaft. Align the screw hole on the side of the fan blade with the dent
part of the motor shaft. Insert the set screw (3) into the screw hole and use a hex wrench to tighten it.
Make sure the fan blade fits firmly onto the motor shaft.
6. Close the front guard (1) to the rear guard (5) by clamping 8 of the guard clips into the rear guard (5). Use a
cross screw driver to fasten screw with nut into the hole of rear guard (5).
OPERATING INSTRUCTIONS
1. Plug the power cord into a suitable socket.
2. Turn the switch at the rear of the motor housing to select the speed. 0 = OFF, 1 = Low speed, 2 = Medium
speed, 3 = High speed.
3. After use, switch off the appliance and unplug it.
OSCILLATION ADJUSTMENT
The diagram above shows the underneath of the fan’s Motor unit. In the position A (Oscillation), the fan head
will swing side to side during operation. To fix the fan head to blow air in a fixed direction, first turn off and
unplug the fan, then unscrew the Nut (C) and screw it into the other hole – Position B (No Oscillation).
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Emerio FN-110143 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Emerio FN-110143 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info