362125
10
Zoom out
Zoom in
Previous page
1/21
Next page
10
TIP: The amount of foam required will vary
depending on the drinks being made. For
example, a cappuccino requires more foam than
a latte.
10. Stop the steam immediately by turning the
steam and hot water control dial to the
center position.
IMPORTANT: Do not boil the milk.
11. Remove the pitcher,
immediately wipe the
steam nozzle and
wand with a clean
damp cloth (28) and
purge a small amount
of steam.
USING THE HOT WATER
FUNCTION
1. Place the cup or container under the steam/
hot water nozzle and activate the hot water
function
by turning the steam and hot
water control dial to the hot water setting (38).
2. Once you have dispensed the required
amount of hot water into the cup or container,
stop the hot water by turning the steam/hot
water control dial to the O position.
3. Remove the cup or container and swing the
steam/hot water wand over the drip tray to
catch any drips of water.
CLEANING AND
MAINTENANCE
Always turn the espresso maker off and remove
the plug from the electrical outlet before cleaning.
Never immerse unit in water or other liquid. To
clean, simply wipe with a clean damp cloth and
dry before storing.
CLEANING THE FILTERS, PORTAFILTER
HOLDER AND BREW HEAD
r5IFTUBJOMFTTTUFFMGJMUFSTBOEQPSUBGJMUFS
holder should be rinsed under water
immediately after use to remove all coffee
particles. You may also use the grey cleaning
pin (smaller pin) to clear the opening.
r1FSJPEJDBMMZSVOXBUFSUISPVHIUIFNBDIJOF
with the portafilter holder in place, but
without any ground coffee, to rinse out
any lingering coffee particles.
r5IFJOTJEFPGUIFCSFXIFBETIPVMECFXJQFE
with a damp cloth to remove any coffee particles.
CLEANING THE OUTER HOUSING/CUP
WARMING PLATE
tThe outer housing and cup warming plate
can be cleaned with a soft, damp cloth.
Do not use any scouring agents or harsh
cleaners.
CLEANING THE GRATE ON THE DRIP TRAY
tThe grate should be removed, emptied and
cleaned frequently, particularly when the drip
tray is full.
r5IFHSBUFDBOCFXBTIFEJOXBSNTPBQZ
water and rinsed thoroughly. Use a non-
abrasive washing liquid (do not use abrasive
cleaners, pads or cloths which can scratch
the surface).
CLEANING THE DRIP TRAY
tThe drip tray can be
removed after the grate
is removed and then
cleaned with a soft,
damp cloth (do not use
any scouring agents or
harsh cleaners).
NOTE: Do not clean any of
the parts or accessories in
the dishwasher.
CLEANING THE STEAM WAND
r5IFTUFBNXBOETIPVME
always be cleaned after
steaming milk.
r8JQFUIFTUFBNXBOE
with a damp cloth,
then with the steam
wand directed back
into
the drip tray, momentarily
set the steam and
hot water control dial to the hot water setting.
This will release any remaining milk from
inside the steam wand.
r.BLFTVSFUIFTUFBN
and hot water control
dial is in the O position.
Press the power button
off, unplug the power
cord and allow the
machine to cool.
28
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elta em 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elta em 200 in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info