708975
2
Zoom out
Zoom in
Previous page
1/2
Next page
2
(1) TEST MODE
Turn t
he LUX control and the TIME control
counter clockwise to the edge the TEST
position.
Turn on
the wall switch. The light starts warm-up
for 1 minute. During 1 minute warm-up period, the
light will stay on.
Walk through the detection area. The light turns
on when you move and turns off when you stop.
For a smaller coverage area, point the sensor
down; for a larger coverage area, point the sensor
up.
(2) TIM
E ADJUSTMENT
The TI
ME adjustment controls how long the light will
stay on after the motion has been detected.
About
5 seconds About 12 minutes
(3) LUX A
DJUSTMENT
The LUX adj
ustment determines at what light level the
lighting system will start operating when you set the
sensor to automatic operation.
(4) AUTO
MATIC OPERATION
Turn on the wall switch. When the sensor detects
motion, the light automatically turns on. The built-in
photocell turns the sensor off and on according to the
light level selected by the LUX adjustment.
(
5) MANUAL
OVERRIDE CLICK TWICE
Automatic switching can be overridden to allow the
lighting to illuminate regardless of movement or light
sensitivity. Turn the switch OFF - ON - OFF - ON
within 2 seconds.
In manual override mode, the lighting will remain on
for approx. 4 to 6 hours regardless of movement. Then
the motion switch will return to automatic mode.
You can also manually set the motion switch to
automatic mode by turning it off for 10 seconds, and
then on again.
TROUBLESHOOTING
Light does not turn on:
Confirm that you have made a correct “wiring
connection”.
Check if you have already turn
ed on the
connected wall switch, or circuit breaker.
Examine if the bulb of the lighting system is in
good condition or loose.
Adjust the LUX
control knob by turning it counter
clockwise.
Light remains on:
Make sure the wiring connection is correct.
SPECIFICATIONS
Power Requirement
AC 220 ~ 240V / 50Hz
Lighting Load
Up to 1000W Halogen/
Incandescent
Up to 400W Fluorescent
Up to 150W LED
Detection Field
(at 20°C)
Up to 20 and 12 meter
Swiveling Angle
Vertical 35° Horizontal 70°
Mounting Height
1.8 ~ 2.0m Wall Mount
or 2.5 ~ 4.0m Ceiling Mount
Sensor Operation
Auto/Manual Override
Time Adjustment
Approx. 5 sec ~ 12 min
Lux Adjustment
Approx. 30 ~ 200 Lux
Warm Up Time
About 1 min.
Protection Class
II
Protection Degree
IP44
Safety
CE
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elro LP152011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elro LP152011 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elro LP152011

Elro LP152011 User Manual - German - 2 pages

Elro LP152011 User Manual - Dutch - 2 pages

Elro LP152011 User Manual - French - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info