533983
1
Zoom out
Zoom in
Previous page
1/2
Next page
Receiver
Récepteur
Empfänger
Odbiornik
Ontvanger
Receptor
The HE820 is a 230V plug-in receiver that can be combined with up to 5 transmitters
from the HE series. If the plug-in receiver is activated, it can emit these dierent
combinations of light and sound signals.
Installing your plug-in receiver
a. Plug your receiver into an electrical socket.
1
The receiver is now in learning mode
and for 15 seconds it can be connected to a transmitter.
b. Follow the instructions to complete procedure for linking to a transmitter.
Setting the alarm signal of your plug-in receiver
a. Use the switch
2
on the side of the receiver to switch between the dierent signals:
Audio signal (A), Light signal (B) or Audio and light signal (C).
Disconnecting your plug-in receiver from your doorbell
a. Push the top button
3
of the receiver with a thin pointed object and wait for the
light and/or sound. Within this time, press the doorbell too.
b. The receiver is now switched o and no longer responds to the doorbell. Remove
the receiver from the socket for minimum 45 seconds to completely disconnect the
doorbell.
Products compatible with the plug-in receiver: HE852, HE861, HE851, HE862, HE842,
HE843
Der HE820 ist ein 230V Plug-In Empfänger und kann in Kombination mit maximal 5
Sendern der HE-Serie verwendet werden. Wenn der Plug-In Empfänger aktiviert wird,
kann er verschiedene Kombinationen von Licht- und Tonsignalen aussenden.
Einstellung Ihres Plug-In Empfängers
a. Setzen Sie den Empfänger in einer Steckdose ein.
1
Der Empfänger bendet sich
jetzt im Leerlauf und kann innerhalb von 15 Sekunden mit einem Sender verbunden
werden.
b. Verwenden Sie die Gebrauchsanweisung des Senders, um die Verbindung
durchzuführen.
Das Alarmsignal des Plug-In Empfängers einstellen
a. Verwenden Sie den Schalter
2
an der Seite des Empfängers, um zwischen den
verschiedenen Signalen zu schalten: Ton (A), Lichtsignal (B) oder Ton und Lichtsignal
(C).
Ihren Plug-In Empfänger von der Türklingel abkoppeln
a. Drücken Sie mit einem dünnen spitzen Gegenstand auf die oberste Taste
3
des
Empfängers und warten Sie auf ein Licht- und/oder Tonsignal. Drücken Sie in dieser
Zeit auch die Türklingel.
b. Der Empfänger ist jetzt ausgeschaltet und reagiert nicht mehr auf die Türklingel.
Ziehen Sie den Empfänger mindestens 45 Sekunden aus der Steckdose, um die
Türklingel vollständig abzukoppeln.
Mit dem Plug-In Empfänger kompatible Produkte: HE852; HE861; HE851; HE862; HE842;
HE843
De HE820 is een 230V plug-in ontvanger die gebruikt kan worden in combinatie met
maximaal 5 zenders uit de HE serie. Als de plug-in ontvanger geactiveerd wordt, kan deze
verschillende combinaties van licht- en geluidssignalen voortbrengen.
Uw plug-in ontvanger instellen
a. Plug uw ontvanger in een stopcontact.
1
De ontvanger staat nu in de leerstand en
kan gedurende 15 seconden gekoppeld worden aan een zender.
b. Volg de handleiding van de zender om de koppelprocedure te voltooien.
Het alarmsignaal van uw plug-in ontvanger instellen
a. Gebruik de schakelaar
2
aan de zijkant van de ontvanger om te schakelen tussen de
verschillende signalen: Geluid (A), Lichtsignaal (B) of Geluid en lichtsignaal (C).
Uw plug-in ontvanger ontkoppelen van uw deurbel
a. Druk met een dun puntig object op de bovenste knop
3
van de ontvanger en wacht
op het licht- en of geluidssignaal. Druk binnen deze tijd ook op de deurbel.
b. De ontvanger is nu uitgeschakeld en reageert niet meer op de deurbel. Haal de
ontvanger minimaal 45 seconden uit het stopcontact om de deurbel volledig te
ontkoppelen.
Producten compatibel met plug-in ontvanger: HE852; HE861; HE851; HE862; HE842; HE843
Le HE820 est un récepteur enchable 230 V qui peut être utilisé en combinaison avec
maximum 5 émetteurs de la série HE. Si le récepteur enchable est activé, il peut
émettre diérentes combinaisons de signaux sonores et lumineux.
Régler votre récepteur enchable
a. Enchez votre récepteur dans une prise de courant.
1
Le récepteur est alors en mode
apprentissage et peut être couplé à un émetteur pendant 15 secondes.
b. Suivez les instructions de l’émetteur pour terminer la procédure de couplage.
Régler le signal d’alarme de votre récepteur enchable
a. Utilisez l’interrupteur
2
sur le côté de votre récepteur pour choisir l’un des diérents
signaux: Sonnerie (A), Signal lumineux (B) ou Sonnerie et signal lumineux (C).
Découpler votre récepteur enché et votre sonnette
a. Appuyez avec un objet pointu sur le bouton supérieur
3
du récepteur et attendez
jusqu’au signal sonore et/ou lumineux. Appuyez pendant ce temps sur la sonnette.
b. Le récepteur est désormais désactivé et ne réagit plus à la sonnette. Retirez le
récepteur de la prise de courant pendant minimum 45 secondes pour découpler
complètement la sonnette.
Produits compatibles avec le récepteur enchable: HE852; HE861; HE851; HE862; HE842;
HE843
Produkt HE820 to odbiornik 230V z wtyczką, który można połączyć z maksymalnie 5
nadajnikami z serii HE. Gdy odbiornik jest aktywny, może emitować różne kombinacje
sygnałów świetlnych i dźwiękowych.
Montaż odbiornika z wtyczką
a. Włóż odbiornik do gniazdka elektrycznego.
1
Odbiornik znajduje się w trybie
programowania i przez 15 sekund można go połączyć z nadajnikiem.
b. Postępuj zgodnie z instrukcjami, aby dokończyć procedurę łączenia z nadajnikiem.
Ustawianie sygnału alarmu odbiornika z wtyczką
a. Za pomocą przełącznika
2
znajdującego z boku obudowy odbiornika, możesz
przełączać się pomiędzy różnymi sygnałami: sygnał dźwiękowy (A), sygnał świetlny
(B) lub sygnał dźwiękowy i świetlny (C).
Odłączanie odbiornika z wtyczką od dzwonka
a. Wciśnij górny przycisk
3
odbiornika ostro zakończonym przedmiotem i zaczekaj na
pojawienie się sygnału świetlnego oraz/lub dźwiękowego. W tym czasie wciśnij też
przycisk dzwonka.
b. Odbiornik jest teraz odłączony i nie reaguje na polecenia dzwonka. Wyjmij odbiornik z
gniazdka na co najmniej 45 sekund, aby całkowicie odłączyć dzwonek.
Produkty kompatybilne z odbiornikiem z wtyczką: HE852, HE861, HE851, HE862, HE842,
HE843
Specifications:
Voltage: 230V~50HZ
Range: up to 50 meters
Warranty: 2 years
GB
D
NL
F
PL
E
HE820
3
1
El HE820 es un receptor enchufable de 230 V que puede utilizarse en combinación con
un máximo de 5 emisores de la serie HE. Una vez activado, el receptor enchufable puede
mostrar diferentes combinaciones de señales sonoras y luminosas.
Conguración del receptor enchufable
a. Conecte el receptor a una toma eléctrica.
1
El receptor pasará a modo de
aprendizaje y dispondrá de 15 segundos para conectarlo a un emisor.
b. Siga las instrucciones del emisor para completar el procedimiento de vinculación.
Conguración de la señal de alarma del receptor enchufable
a. Utilice el interruptor
2
situado en el lateral del receptor para elegir entre los
diferentes tipos de señales: sonora (A), luminosa (B) o sonora y luminosa (C).
Desvinculación del receptor enchufable y el timbre
a. Presione con un objeto delgado y puntiagudo el botón
3
situado en la parte
superior del receptor y espere a que se emita la señal luminosa y/o sonora. Durante
este intervalo, pulse también el timbre.
b. El receptor se desactivará y dejará de responder al timbre. Desconecte el receptor
de la toma eléctrica durante al menos 45 segundos para desvincular el timbre por
completo.
Productos compatibles con el receptor enchufable: HE852; HE861; HE851; HE862; HE842;
HE843
2
A
B
C
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elro HE820 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elro HE820 in the language / languages: English, German, Dutch, French, Polish, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info