483275
34
Zoom out
Zoom in
Previous page
1/34
Next page
-33--32-
KEY TONE
This feature, if enabled, allows the Control Panel to be emitted a tone each time
the keypad is pressed.
Default setting: ON
Scroll through the menu until ‘2-10 Key Tone’ is displayed. The current setting
will also be displayed.
To change the setting press .
Press to enable Key Tone, or
Press to disable Key Tone.
GSM DIALER
This feature, if enabled, allows the Control Panel to be connected the GSM dialer.
Default setting: OFF
Scroll through the menu until ‘2-11 GSM Dialer’ is displayed. The current
setting will also be displayed
To change the setting press .
Press to enable GSM dialer, or
Press to disable GSM dialer.
DIAL MODE
This facility controls whether the internal telephone dialer operates with the
voice dialer facility or an external Remote Security Monitoring service.
Default setting: Voice Dialer
Scroll through the menu until ‘2-12 Dialer mode’ is displayed. The current
setting will also be displayed.
To change the setting press .
Scroll through available options, (Voice Dialer and Digital dialer) until the
required setting is displayed.
Press to save and exit, or
Press to exit without saving.
WIRELESS SIREN HOUSE CODE
Scroll through the menu until ‘2-13 Wirefree Siren’ is displayed and press .
Code Learning
The wireless siren has a row of 8 DIP switches. In order to communicate with
the Control Panel properly, the house code for the wireless siren needs to be
learned by the Control Panel.
Scroll through the menu until ‘1:Code setup’ is displayed and press . Press
the Control Panel’s keypad 1-8 by selecting 0 or 1 respectively in turn. (1 means
the dip switch is set in ON position, 0 is set in OFF position).
Press to save and exit, or
Press to exit without saving.
ENFORCEMENT FOR WIRELESS SIREN
Default setting: ON
Scroll through the menu until ‘2: Siren working’ is displayed. The current
setting will also be displayed.
To change the setting press .
Press to enable the Wireless Siren, or
Press to disable the Wireless Siren.
WIRELESS KEYPAD
This feature, if enabled, allows the Control Panel to be controlled wireless
keypad with ease.
Default setting: OFF
Scroll through the menu until ‘2-14 Wirefree Keypad’ is displayed. The current
setting will also be displayed and press .
Code Learning
Scroll through the menu until ‘:1 Learning ID’ is displayed.
Three possibilities would happen as follows:
Learning OK – the ID code was learned by the Control Panel successfully.
Time Out – the time involved for learning the ID code is 60s. During this
duration, fail to press the button on the remote control would result in
overdue programming.
ID Duplicate – the same ID code was learned by the Control Panel beforehand.
Scroll through the menu until is displayed and press .
Press to enable the Wireless Keypad, or
Press to disable the Wireless Keypad.
:2 Keypad1 Work
ENEN
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elro HA68 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elro HA68 in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elro HA68

Elro HA68 Quick start guide - English - 1 pages

Elro HA68 Quick start guide - German - 1 pages

Elro HA68 User Manual - German - 34 pages

Elro HA68 Quick start guide - Dutch - 1 pages

Elro HA68 User Manual - Dutch - 34 pages

Elro HA68 Quick start guide - French - 1 pages

Elro HA68 User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info