621110

Elro EC11 - Wireless Energy Meter Manual

1
Zoom out
Zoom in
Previous page
1/2
Next page
1
Wireless Energy Meter
The instruments are designed to provide accurate and reliable measurements.Before setting up the meter,please read these
instructions carefully.
Main set function:
The main set work on battery,can be put on an indoor desktop, it can display datas as the following:
1. Display current clock.
2. Display temperature and humidity.
3. Display line voltage.
4. Display line current.
5. Display line power.
6. Display and memory each channel accumulative Kwh.
7. Display and memory greenhouse gas emossion.
8. Display and memory accumulative total Kwh..
9. Display and memory total on time and total electric charge.
10. Display and memory total on time and total electric charge of price1.
11. Display and memory total on time and total electric charge of price2.
12. Receive max. 3 channel wireless remote transmitter.
Transmitte set function:
The transmitter acquisition voltage, current, power and transmitt them to main set,then display on main set. Plug the remote
transmitter into power socket, then plug an appliance into the transmitter. The transmitter can transmit up to 30 meters without outside
interference(e.g. metal surface,electrical device,ect).
I. Key
MODE key
SET key
PRICE key
CODE key
UP key
CLR key
CLK/ARM key
II. Operating instruction
1. Choice of display mode:
(1)Press MODE key,the data display line voltage,line current,line power,Kwh,greenhouse gas emossion.
(2)Press PRICE key,the data display accumulative total Kwh, total on time and total electric charge of price1, total on time and total
electric charge of price2.
2. Clock set
Press SET key for over 3 seconds to set week firstly,press UP key to set week;then Press SET key to set hour, press UP key to set
hour; then Press SET key to set minute, press UP key to set minute,comeback clock display mode if no key-press operation is
performed after 15 seconds or press CLK/ARM key.
3. Clock alarm set
Press CLK/ARM key under clock display mode to enter alarm display mode. Press SET key to set hour first, press UP key to set hour;
then Press SET key to set minute, press UP key to set minute. Return to clock display at press of CLK/ALM key, and icon “ ” will
display and flicker if alarm is set.
Alarm starts at appointed time: when alarm starts at appointed time, buzzer will give off “BEEP” sound and stops after 60 seconds;
press any key to stop alarm within 60 seconds. Press CLR key to cancel alarm during alarm setting.
4. Price set
Press PRICE key once and release,Then press and hold PRICE key for 5 seconds during display state of total Kwh or price.
(1). Setting price 1:
(a). Press SET key once and release, SET display, the first digital COST/kWh flash, press UP button to set it.
(b). Press SET key once again and release, the second digital COST/kWh flash, press UP button to set it.
(c). Press SET key once again and release, the third COST/kWh flash, press UP button to set it.
(d). Press SET key once again and release, the fourth COST/kWh flash, press UP button to set it.
(e). Press SET key once again and release, the radix point COST/kWh flash, press UP button to set it.
(f). Press SET key once again and release, the weekday flash, press UP button to set it.
(g). Press SET key once again and release, the hour of ON TIME flash, press UP button to set it.
(h). Press SET key once again and release, the minute of ON TIME flash, press UP button to set it.
(2). Setting price 2:
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elro EC11 - Wireless Energy Meter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elro EC11 - Wireless Energy Meter in the language / languages: English as an attachment in your email.

The manual is 0,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info