708966
4
Zoom out
Zoom in
Previous page
1/4
Next page
-3- -4-
Installing Your Video Doorphone
A: Mounng the outdoor unit (surface mount)
1. Take the rainshade and use it to mark the drilling
holes on your wall. Make sure that you are able to
reach this place from the back with the 2x 4-wire
connecon cable (and the door lock cable if
applicable) to link it to the monitor. We recommend
a mounng height of between 1,35 and 1,70 meters.
Try to avoid direct sunlight or rain as much as
possible.
2. Put the 4-wire cable with the connector through the
rectangular hole in the rainshade and connect the
cable plug to the slot. If you want to use exisng
wires, make sure you have at least 12x 0,5 mm and
ask a professional electrician for support.
3. Oponally you can connect an electric door lock.
To connect a door lock you always use
2 x 0.1 mm² cables. Refer to the wiring instrucons.
diagrams in the "Adding a Door Lock" secon.
4. Remove the aluminium alloy panel with the inbus
screw; take out the name plate paper, note your
name and put it back in. Then put it into the
rainshade with the top side first and fix it with 2
screws at the boom.
5. Unfasten the screw behind the camera lens and
manually move the camera into the desired posion
for the best view; then fasten the screw firmly.
6. Put the aluminium alloy panel back and fix it with
the inbus screw through the hole in the rainshade.
B: Mounng the indoor monitor
7. Use the mounng bracket to mark the drilling holes
on your indoor wall and fix it to the wall, so that the 4-
wire cable and the power cable (plus oponally an extra
wire for door/gate lock) can go through from the back.
8. Connect the 4 wire cable to the slots number 1-4:
- 1 Audio wire (brown)
- 2 Ground wire (green)
- 3 Video wire (black)
- 4 Power wire (blue)
The wires must be in the same order as in the outdoor unit (check wiring diagram in
the “Adding a door lock” secon for details)
9. Lastly insert the power cable and hang the monitor on the mounng bracket. Your
new Video Door Intercom is now ready for use. In case you want to use exisng
wiring, ensure you have at least 4 x 0,5 mm² and keep the maximum length of the
cables below 50 meters.
Funcons of the Indoor Monitor
When a visitor rings the bell, the chosen ringtone will sound and the picture will appear
automacally on the monitor. You can then talk to the visitor by briefly pressing the TALK
buon of the monitor. By pressing the DOOR UNLOCK or the GATE UNLOCK buon, you
can unlock your door or gate. If you want to view the picture from the camera without
someone having rung the bell, you can press the LIVE VIEW buon to see the live picture
for approx. 40 seconds.
With the buons on the side of the monitor you can select your ringtone,
change the ring and talk volume and adjust the brightness and
color intensity of the screen, see page 2.
Door unlock Gate unlock Talk Live view
1,35 - 1,7m
5
VERSTELBAAR
55°
LENS
6
4
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elro DV477W3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elro DV477W3 in the language / languages: English as an attachment in your email.

The manual is 2,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elro DV477W3

Elro DV477W3 User Manual - German - 4 pages

Elro DV477W3 User Manual - Dutch - 4 pages

Elro DV477W3 User Manual - French - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info