708667
7
Zoom out
Zoom in
Previous page
1/8
Next page
Next step is that we define some standard system settings: ; press until you see in the display:
3. ZONE SETTING. Press , display 2. SYSTEM SETTING. Choose:
System Setup
House Code
01010101
This is the house code you programmed on page 2
Alarm Time
ON, 180s
Loud alarm is ON. No sound from Alarm Panel ; Off
Wirefree Siren
ON
‘ON’
RF Jamming Detection
OFF
‘OFF’
Back Light
10s
Backlight of display switches of ….. seconds
Alarm Relay
On Until Disarm
‘ON’
Zone Lockout
ON
‘ON’
Remote Phone Control
ON
‘ON’
Rings to Answer Phone
6
‘6’
Call Abort
OFF
‘OFF’
Dial method
Tone/DTMF
‘TONE/DTMF’
Dialer Mode
Voice Dialer
‘VOICE DIALER’
Time
12:00:00
Put in actual time
Date
01/01/03
Put in actual date
VOICE DIALER SETUP:
Press , and press , until 4. VOICE DIALER SETUP’ is displayed and press .
Scroll through the menu until ‘4-1 PHONE NUMBERSis displayed and press .
Scroll through the menu until the required Telephone number (1-4) is displayed. The current setting
of each telephone number will also be displayed. To change the number press .
Enter the new telephone number (32 digits max.), press to save and exit, or press to exit
without saving. Press to insert a 3.6s pause in the dialing sequence. Press to move
the cursor left. Press to move the cursor right. Press to delete the character under the
cursor. Press and hold to erase the entire phone number.
Scroll through the menu until ‘4-3 RECORD VOICEis displayed and press .
Scroll through the available menu options until the required message type to be recorded is
displayed. 1) Main Alarm message, (12 seconds max). 2) Intruder Alarm message, (4 seconds max).
Latch Key setting; If you want to receive a call, when one of the users switches the alarm panel on or
off. Scroll through the top level programming menu until ‘6. LATCH KEY SETUP’ is displayed and
press . Selected users setup: This allows controls over which users the Latch Key facility
operates with when set to ‘Selected-Users’. Default setting: OFF . Scroll through the menu until ‘6-2
SELECTED USER SETUP’ is displayed and press . Scroll through the menu until the required
user number (1-6) to be configured is displayed. The current status will also be displayed.
TELEPHONE NUMBERS : Scroll through the menu until ‘6-3 PHONE NUMBERS’ is displayed and
press .Scroll through the menu until the required telephone number (1-2) is displayed. The
current setting will also be displayed. To change the number press . Enter the new telephone
number (32 digits max).
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elro AP5500 - Pro Alarm System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elro AP5500 - Pro Alarm System in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elro AP5500 - Pro Alarm System

Elro AP5500 - Pro Alarm System User Manual - English - 49 pages

Elro AP5500 - Pro Alarm System Quick start guide - German - 10 pages

Elro AP5500 - Pro Alarm System Quick start guide - Dutch - 8 pages

Elro AP5500 - Pro Alarm System User Manual - Dutch - 42 pages

Elro AP5500 - Pro Alarm System Quick start guide - French - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info