614473
44
Zoom out
Zoom in
Previous page
1/48
Next page
42
SECTION IV. CARE OF YOUR MACHINE
CleaningtheHookRace,FeedDogandthe
ThreadCutterMechanism
WARNING:
•Turnthepowerswitchoffandunplugthemachine
before cleaning.
•Donotdismantlethemachineotherthanasexplained
in this section.
CAUTION:
Do not store the machine in a high-humidity area,
near a heat radiator, or in direct sunlight.
InstallingtheBobbinHolder
z Insert the bobbin holder q so that the knob e fits
next to the stopper w on the hook race.
x Insert the bobbin.
c Attach the needle plate with the setscrews t. After
cleaning the machine, make sure the needle and
presser foot are attached.
q Bobbin holder
w Stopper
e Knob
r Screwdriver
t Setscrews
Press the needle up/down button to raise the needle,
then unplug the sewing machine.
Remove the needle and presser foot.
z Remove the setscrews w on the left hand side of the
needle plate e with the screwdriver q supplied with
the machine. Remove the needle plate e.
x Remove the bobbin. Lift up the bobbin holder y and
remove it.
c Clean the bobbin holder y with a lint brush r.
v Clean the feed dog u, thread cutter mechanism t
and hook race i with the lint brush.
b Clean the center of the hook race with a dry cloth.
q Screwdriver
w Setscrews
e Needle plate
r Lint brush
t Thread cutter mechanism
y Bobbin holder
u Feed dog
i Hook race
* You may also use a vacuum cleaner.
NOTE:
Clean the outside of the machine with a soft cloth and
neutral soap.
After cleaning the machine, make sure the needle and
presser foot are attached.
w
q
w
y
e
r
y
r
u
t
i
z x
c
q
w
e
t
t
r
z
x
c
v
b
NOTE:
Frequent use of the machine causes lint and
thread residue build up in the hard to reach part
of the machine, which may cause malfunction. We
recommend to clean up the inside of the machine
periodically. Contact the service center or the store
from where the machine was purchased.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna Lotus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna Lotus in the language / languages: English as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elna Lotus

Elna Lotus User Manual - English, German, French - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info