704004
78
Zoom out
Zoom in
Previous page
1/84
Next page
72
Cleaning the Feed Dog
z
Turn off the power switch and unplug the machine.
x
Open the looper cover and side cover.
c
Remove the needles and presser foot.
v
Remove the needle plate set screw, and remove the
needle plate.
q
Needle plate
w
Needle plate set screw
37
Replacing the Light Bulb
1.
Turn off the power switch and unplug the machine.
2. Loosen the face plate set screw, and remove the
face plate.
Face plate
Set screw
To remove:
Push and twist to the left.
To attach:
Push and twist to the right.
Reattach the face plate, and retighten the face plate
set screw.
Light bulb
To remove
To attach
Note:
 The machine is designed to use a 15 WATT
maximum light bulb.
 The light bulb will be HOT. Protect your fingers
when you handle it.
Cleaning the Feed Dog
1. Turn off the power switch and unplug the
machine.
2. Open the looper cover and side cover.
3. Remove the needles and presser foot.
4. Remove the needle plate set screw, and remove
the needle plate.
Needle plate
Needle plate set screw
5. Brush out the lint around the feed dogs to the
front by using the lint brush or use a vacuum
cleaner.
6. Reattach the needle plate, presser foot and
needles.
Close the looper cover and side cover.
Feed dog
1 2 3 4
5 6
37
Replacing the Light Bulb
1.
Turn off the power switch and unplug the machine.
2. Loosen the face plate set screw, and remove the
face plate.
Face plate
Set screw
To remove:
Push and twist to the left.
To attach:
Push and twist to the right.
Reattach the face plate, and retighten the face plate
set screw.
Light bulb
To remove
To attach
Note:
 The machine is designed to use a 15 WATT
maximum light bulb.
 The light bulb will be HOT. Protect your fingers
when you handle it.
Cleaning the Feed Dog
1. Turn off the power switch and unplug the
machine.
2. Open the looper cover and side cover.
3. Remove the needles and presser foot.
4. Remove the needle plate set screw, and remove
the needle plate.
Needle plate
Needle plate set screw
5. Brush out the lint around the feed dogs to the
front by using the lint brush or use a vacuum
cleaner.
6. Reattach the needle plate, presser foot and
needles.
Close the looper cover and side cover.
Feed dog
1 2 3 4
5 6
b
Brush out the lint around the feed dogs to the front by
using the lint brush or use a vacuum cleaner.
n
Reattach the needle plate, presser foot and needles.
Close the looper cover and side cover.
q
Feed dog
Oiling the Machine
Applyafewdropsofnequalitysewingmachineoiltotheparts
indicated with arrows.
It is recommended to apply oil once a week in normal use, once
in ten hours in continuous use.
38
Oiling the Machine
Apply a few drops of fine quality sewing machine oil
to the parts indicated with arrows.
It is recommended to apply oil once a week in
normal use, once in ten hours in continuous use.
 Open the side cover and apply oil.
 Open the looper cover and apply oil.
Carrying the Machine
Put your fingers into the hole on the back side of the
machine as illustrated.
38
Oiling the Machine
Apply a few drops of fine quality sewing machine oil
to the parts indicated with arrows.
It is recommended to apply oil once a week in
normal use, once in ten hours in continuous use.
 Open the side cover and apply oil.
 Open the looper cover and apply oil.
Carrying the Machine
Put your fingers into the hole on the back side of the
machine as illustrated.
* Open the side cover and apply oil.
* Open the looper cover and apply oil.
Carrying the Machine
Putyourngersintotheholeonthebacksideofthemachine
as illustrated.
38
Oiling the Machine
Apply a few drops of fine quality sewing machine oil
to the parts indicated with arrows.
It is recommended to apply oil once a week in
normal use, once in ten hours in continuous use.
 Open the side cover and apply oil.
 Open the looper cover and apply oil.
Carrying the Machine
Put your fingers into the hole on the back side of the
machine as illustrated.
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXtend 264 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXtend 264 in the language / languages: English, German, French as an attachment in your email.

The manual is 3,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info