704002
93
Zoom out
Zoom in
Previous page
1/96
Next page
89
Error Message Error Description Remedy
E : 00
Communication error with the RCS unit. Turn the power switch off and turn it on
again.
Initializing error. Turn the power switch off and turn it on
again.
Needle bar switching error. Turn the power switch off and turn it on
again.
Needle bar stop position error Press the ENTER button to reset the
machine.
Driving motor stops due to an overload. After 15 seconds, the LCD screen will
show the Ready to Sew mode display.
Remove jamming threads or other
cause of overloading.
Needle thread broke or ran out. Press the MODE button to return to the
Ready to Sew mode and re-thread the
needle.
Needle bar setting error. Press the MODE button to return to
the Ready to Sew mode, then turn the
power switch on and set the needle bar
number.
Auto thread cutting error. Turn the power switch off and turn it on
again.
Opening tension disks while stitching. Pull the tension release lever to close
the tension disks. The LCD screen will
show the Ready to Sew mode display.
Upper shaft stop position error. Turn the power switch off and turn it on
again.
Initializing error of the thread catcher
motor.
Press the ENTER button to initialize the
motor.
The embroidery area exceeds the hoop. Press the ENTER button.
Check the hoop type and the
embroidery area.
* If the error message appears repeatedly, contact the service center or the store from whom the machine was
purchased.
Audible signal The buzzer sounds when:
pip Normal operation
pip-pip-pip-pip Invalid operation or malfunction
pip-pip Thread color change
pip-peep pip-peep Embroidery completed
peep Malfunction
Audible Signals
Error Message
93


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXpressive 970 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXpressive 970 in the language / languages: English as an attachment in your email.

The manual is 10,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elna eXpressive 970

Elna eXpressive 970 User Manual - German - 96 pages

Elna eXpressive 970 User Manual - French - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info