614480
108
Zoom out
Zoom in
Previous page
1/112
Next page
106
The machine is started after halting due to overload.
The feed dog is lowered while the machine is running.
The presser foot is raised while the machine is
running.
The bobbin winder spindle is shifted to the left while
winding a bobbin.
The machine does not work properly due to a
problem in the control circuit.
The elongation key is pressed when a pattern
that cannot be elongated has been selected.
The LCD screen shows an
abnormal display.
The memory key is pressed when a pattern that
cannot be memorized has been selected.
The machine is started without lowering the feed
dog with basting or button sewing selected.
Elongation is applicable only to
satin stitches.
Select a pattern that can
be memorized.
Lower the feed dog.
Wait for at least 15 seconds to
restart. Remove tangled threads
around take-up lever, hook race and
automatic thread cutting mechanism.
Do not lower the feed dog, raise
presser foot or shift bobbin winder
spindle while the machine is running.
Contact the service center or the
store from whom the machine
was purchased.
Warning Sign
Cause
Try this
The machine is started with the feed dog
lowered.
Raise the feed dog.
Turn the power off and turn it on again.
The startover key is pressed when a pattern that
cannot be started over has been selected.
The vertical mirror image key is pressed when
a pattern that cannot be turned over has been
selected.
Select a pattern that can
be started over.
Select a pattern that can
be turned over.
The machine is started without the needle plate.
The machine is started when the needle plate
for straight stitch is attached and a pattern that
cannot be used for the needle plate has been
selected.
Attach the needle plate.
Replace the needle plate.
The horizontal mirror image key is pressed when
a pattern that cannot be turned over has been
selected.
Select a pattern that can
be turned over.
Audible Signal The Buzzer sounds when:
pip Normal operation.
pip-pip Deleting a pattern combination with the clear key.
pip-pip-pip Invalid operation or malfunction.
peep E1-E7 error occurred.
pip pi-pi-pi-peep Buttonhole is completed.
108


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXcellence 760 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXcellence 760 in the language / languages: English as an attachment in your email.

The manual is 6,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info