614478
106
Zoom out
Zoom in
Previous page
1/107
Next page
102
The machine is started after halting due to
overload.
The feed dog is lowered while the machine is
running.
The presser foot is raised while the machine is
running.
The bobbin winder spindle is shifted to the left
while winding a bobbin.
Audible Signal
The Buzzer sounds when:
pip
Normal operation
The machine does not work properly due to a
problem in the control circuit.
The elongation key is pressed when a pattern
that cannot be elongated has been selected.
The LCD screen shows an
abnormal display.
The memory key is pressed when a pattern that
cannot be memorized has been selected.
The machine is started without lowering the feed
dog with basting or button sewing selected.
Elongation is applicable only to
satin stitches.
Select a pattern that can be
memorized.
Lower the feed dog.
Wait for at least 15 seconds to
restart. Remove tangled threads
around take-up lever, hook race
and automatic thread cutting
mechanism.
Do not lower the feed dog, raise
presser foot or shift bobbin
winder spindle while the machine
is running.
Contact the service center or the
store from whom the machine
was purchased.
Warning Sign
Cause
Try this
The machine is started with the feed dog
lowered.
Raise the feed dog.
Turn the power off and turn it on again.
pip-pip-pip
Invalid operation or malfunction
peep
E1-E7 error occurred
pip pi-pi-pi-peep
Buttonhole is completed.
pip-pip
Deleting a pattern combination with the clear key
106


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXcellence 740 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXcellence 740 in the language / languages: English as an attachment in your email.

The manual is 4,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info